An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: Are the Window regulators for the Cherokee Sport and...
Check with a local scrap yard... they would know best. As far as I know, unless there is a difference in door shape, regulator should be the same. Name differences generally denote trim packages, and don't affect hard parts that much.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Power Window Motor: Service and Repair
1. Disconnect and isolate the battery negative cable.
2. Remove the window regulator from the door.
3. Place the window regulator on a suitable work surface and remove the screws that secure the power window motor to the window regulator.
4. Remove the power window motor from the window regulator.
1. Position the power window motor onto the window regulator.
2. Install and tighten the screws that secure the power window motor to the window regulator. Tighten the screws to 9 Nm (80 in. lbs.).
3. Install the window regulator onto the door.
4. Reconnect the battery negative cable.
first these are easy to do,second look on ebay a-1 auto I think sells replacement for around $100 U.S
Take door panel off,there are several bolts in reg and 2 keepers on the window glass unhook the 2 keepers unplug the motor and turn unit and bring out the bottom of the doorthe window glass does NOT have to come out. it should only take less than an hour to do.
Most likely the Black Plastic piece is a gromett, and it goes on to the regulator then snaps into the window's cut out hole, this allows the window to secure it self to the regulator.
Look or feel down on the bottom of the inside of the door, and see if theres any thing else that might of come off or broke, like a pin or a clip, once you secure the gromet to the window there should be a clip or a push pin that holds it into place.
Let me know if this helps, I will try to find a picture of the regulator diagram for you it might take some time.