Question about Chevrolet Blazer

1 Answer

1992 s10 blazer with push button 4x4....goes into low ok but won't go into high.....all lighs seem to be working. Had it into a garage...they told me vacuum was ok... electrical was ok.....thought it might be inside the transfer case.....a computer check told them it was in limp mode.....they dis-connected the battery for about 10 minutes....they said this might re-set everything... it didn't help....how about the tccm 5amp fuse?Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 327 Answers

Do you have the tranny gear select in Neutral and vehicle speed below 15 MPH.

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99chevy blazer when i push the button to use the 4x4 the lights just flash wat does this mean


Will it go into 4x4 at all, high or low? I had this same issue where the it wouldn't go into 4x4 at all and had to replace the transfer case.

Nov 27, 2010 | 1999 Chevrolet Blazer

2 Answers

I have a 1996 gmc 1500 pick up. When push button for 4x4 high it blinks and no 4x4. But 4x4 lo engages, I am stumped. I hear a relay clicking but like I said no 4x4 high


TRANSFER CASE MOTOR ONLY WORKING IN ONE DIRECTION 4WHEEL LOW, HAD A BLAZER WITH SAME PROBLEM REPLACED TRANSFER CASE MOTOR.

Jan 27, 2010 | 1996 GMC Sierra

3 Answers

1991 Chevy S10 Blazer 4.3 4x4


4170636.jpgThis is all I've got.Hope this helps?

Dec 20, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

97 S10 4x4, 2 Wheel light does not turn back on immediately


I had a 2000 blazer do the same and it was a vacuum hose leak by a little box in the middle of the firewall.

On my brother's blazer the hose leak was under the top part of the driver's side fender.

Feb 18, 2009 | 1999 Chevrolet Blazer

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

94 s10 blazer wont go out of four wheel drive


The electric shift solennoid on the transfer case is probably bad,common problem with these.

Dec 25, 2008 | 1999 Chevrolet Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

4-wheel high problem


reset the 4x4 computer by pulling out the courtesy lamp fuse and the ATC fuse for 1 minute then reinstall both fuses then cycle the key on and off 5 times. if this works please rate.

Nov 17, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...