Re: need to fix 1996 cavalier driver's side mirror
Need to know if it is 4 door or 2 door. very easy go to junk yard to find replacement you have to snap out the inside panel .ther is also a screw on the inside in the corner that will remove the plate to the mirror. junk yard person will show you.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ok, first things first. take it to a shop and tell them what happened. they will probably need to remove the strut assembly and reposition the spring and make sure it is sitting in the correct position between the upper mount and strut assembly. once they know that the struts are correct, they will need to put the vehicle on the alignment rack and adjust accordingly. this kind of adjustment should be done at least every six months or less depending on your driving habits.
first you need to take the inside mirror off just pops off/ second look for pop outs in the panel for screws/ Then you need to pop out bottom of door then sides then pull up on trim and out/ then disconnect switches take of vapor barrier look inside you will see 2or 3 bolts holding it in take them out have someone hold up glass replace then put it back togehter/ Please rate my response thank you very much
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. You can then disconnect the cable running form the mirror to the control. Then you can access the bolts that secure the mirror onto the door
there is a screw that holds that piece of metal in place. take the screw out and remove the piece of metal then look at a local hardware or automotive store and ask for the windshield adhesive. and fallow that instructions pay close attention to the temperature to be applied at and the Harding or drying time.