Question about Hyundai Santa Fe

1 Answer

I need a picture diagram of all timming marks for a 2003 hyundia santafe 2.4 liter.Just replaced timming belt and will not start.

Posted by on

  • Anonymous Mar 17, 2014

    Timming diagrams for hzj75,showing the timming mark.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 6,674 Answers

Click on link and scroll down, click on your picture to enlarge.

http://www.autozone.com/addVehicleId,2884902/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152801a5837

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for the timing marks on a 2003 santa fe. Can you help me?


This is a common issue and the fix is on this site already. When this link:

Questions Answers for Hyundai Santa Fe timing marks diagram

Feb 09, 2015 | 2003 Hyundai Santa Fe

2 Answers

Need picture of timming marks


has the timing chain been replaced

Mar 27, 2014 | 1984 Datsun 2.8

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    Do you have a diagram for 2003 saturn timing belt


    The 2.2 liter engine uses colored links on the timing chain to align with the marks on the gears. You just have to rotate the engine to where the copper chain link is up on the upper right side of the intake can gear--aligned to the INT diamond on the gear. Then the silver link should be down at about 5 O-Clock on the crankshaft timing mark. The other silver link should then be aligned to the mark on the exhaust cam sprocket. See picture below.

    For the 3.0 liter engine, there are marks on the belt that line up with marks on the gears. The book calls out special tools to hold the cam sprockets in alignment while the belt is put on. There is also a special tool to lock the belt onto the crankshaft sprocket. See pictures below.
    Please let me know if you have questions.

    2.2 liter:

    jturcotte_425.gif



    jturcotte_426.gif

    3.0 liter:
    camshaft sprocket alignment with belt marks

    jturcotte_427.gif


    Camshaft locking tools

    jturcotte_428.gif



    Crankshaft belt tool

    jturcotte_429.gif


    Properly adjusted tensioner

    jturcotte_430.gif

    Dec 08, 2010 | 2003 Saturn VUE

    1 Answer

    2003 volkswagen gti timing belt replacement


    My sincere apologies for the delayed response.
    I have only been a free contributor to this site for the last 4-months.
    I am personally going back to answer your unanswered questions.

    I do not know if you still need this information, however I am answering it either way.

    Click on the following direct Link. It has several Diagrams you will need for your Timing Belt replacement. Included are the Cover Bolt Locations, Tool Needed and Marks for your specific engine.
    You may also want to Print out these Diagrams for future use.

    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

    Again my apologies...


    http://www.2carpros.com/car_repair_information/year/2003/make/volkswagen/model/gti/2003_volkswagen_gti_timing_belt_diagram_marks.htm

    Feb 02, 2010 | 2003 Volkswagen GTI

    1 Answer

    Timing belt diagram


    Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

    Oct 18, 2009 | Hyundai Motor 2003 Sonata

    1 Answer

    Need to know the cam timming marks on a 1998 chrysler stratas with a 2.4 liter engine Thanks!


    I have enclosed a timing belt marks picture for you, hope this information is very helpful!97c8437.gif

    Sep 20, 2009 | 1998 Dodge Stratus

    1 Answer

    Cam shaft timming marks 1999 Daewoo 1.6 liter


    there is a special tool to hold gears in correct place on some of these models, but you can hold one cam at a time with a spanner then feed belt on exhaust cam then inlet cam gear
    get someone to hold gears in place while you feed belt on.
    the inlet cam is more prone to turn off mark more than exhaust.
    if you have tensioner that needs retaining pin in when installing
    you fit belt while aligning timming marks
    fit tensioner as last spot to feed belt on with retaining pin in adjuster
    get correct tension on belt by turning water pump so that you can flex (turn) belt 90 degrees only just while using finger and thumb
    tighten water pump check flex
    check all timing marks are correct
    remove retaining pin from auto tensioner
    turn motor over a couple of turns by hand observing tensioner arrow should hover around V mark and that all timing marks align up again(after one complete turn)

    Aug 02, 2009 | 1999 Daewoo Lanos

    5 Answers

    Serpentine belt replacement


    2.0L Engines
    See Figures 11, 12 and 13
    The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
    Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
    The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
    0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

    Jul 24, 2008 | 1999 Ford Escort

    1 Answer

    Purge valve


    By the intake manifold, what size engine do you have?

    Jul 02, 2008 | 2003 Hyundai Santa Fe

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    239 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    61249 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...