Question about 1995 Jeep Wrangler

1 Answer

4wd problem jeep wrangler yj 1995

4 wheel drive will not engage whatsoever on a 1995 Jeep Wrangler YJ

Posted by on

  • 2 more comments 
  • tommyklr Feb 01, 2009

    i have a 1988 yj and the 4-wheel drive stop working. do you think it could be the vacume or the motor on the side of the axle?

  • Anonymous Mar 13, 2014

    95 wrangler yj will not crank.

  • Anonymous Mar 16, 2014

    1995 jeep wrangler 4weel shifts ok however the lght does not com n when ishft to 4 wheel ,but when im not in 4 wheel it comes on

  • Anonymous Mar 23, 2014

    5th gear doesn't engage

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I just bought a used 97 CHEROKEE but i had the same problem, when i got to looking at it i found out the front driveshaft was shot, look at that, if its not it i would say its probably the transfer case especially with an older vehicle like that which is a very expenxive repair

Posted on Dec 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The 4 wheel drive in my 1995 Jeep YJ is not working. I will shift in to the 4H position and the 4x4 indicator will come on, but the system does not engage. Any clues?


Check the vacuum disconnect on the front axle. After 15 years, the lines break and/or get clogged. I have seen a few of the shift forks in there broken on Jeeps still wheeling with the stock Dana 30. There is a cable option which replaces the vacuum system if you dont want to worry about having the problem again. check Quadratec or 4WD hardware.

Dec 13, 2010 | 1995 Jeep Wrangler

1 Answer

I have a 95 jeep wrangler yj and no 4wd. when i put the shifter into 4wd (hi or low) the indicator light comes on but i get no power to the front wheels. any ideas?


Check the vacuum disconnect on the front axle. After 15 years, the lines break and/or get clogged. I have seen a few of the shift forks in there broken on Jeeps still wheeling with the stock Dana 30. There is a cable option which replaces the vacuum system if you dont want to worry about having the problem again. check Quadratec or 4WD hardware.

Dec 05, 2010 | 1995 Jeep Wrangler

1 Answer

My1995 Jeep Wrangler is hard to start when it is


CHECK BATTERY VOLTAGE.IT SHOULD BE 12.5 VOLTS.IF BATTERY OKAY.YOUR FUEL FILTER COULD BE STOPPED UP.OR YOU NEED NEW PLUGS + WIRES + CAP AND ROTOR.

Apr 18, 2010 | 1995 Jeep Wrangler

1 Answer

1990 jeep yj 4 wheel drive issues


what are you trying to say is that the front wheels wont engage?? if this is your problem? check the actuater on the passenger side axle there are 3 lines that go to it and that is what pulls it in and pushes it out of gear by air.

Oct 06, 2009 | 1990 Jeep Wrangler

2 Answers

4 wheel drive doesnt work.


Has this Jeep been modified at all?
It sounds like the shifter cable was reinstalled backwards.
Specifically the 4-Low "Not Climbing Well". 4-Low should give you the best torque and hill climbing ability.
Do you feel any "Binding" in the steering wheel (difficult to turn)?
Remember a Jeep uses real driveshafts and differentials to give you 4WD - you cannot engage 4WD or 4-Low on dry hard surfaces. It needs a little bit of slip between the wheels for turns.
Check you're fluids too.

Jul 11, 2009 | 1992 Jeep Wrangler

3 Answers

Looking for Service Repair Manual Jeep Wrangler YJ


i have a 1988 jeep wrangler 6cyl with 5 speed transmission. I was shifting the jeep and it got stuck in third gear. We opened it up and saw that the linkage is aligned and everything is in place. I dont know what is wrong and what to do next. please help ....

Jul 10, 2009 | 1992 Jeep Wrangler

1 Answer

1987 Jeep YJ [Wrangler] so owner ship says''


Our Jeep Wrangler YJ's are equipped with a vacuum module on the front axle. It is used to engage the front axle when the transfercase is shifted into 4WD. Check the vacuum lines on the front axle to make sure they are connected. The passenger side axle shaft has a disconnect sleeve that is moved left and right by the vacuum.

Mar 01, 2009 | 1987 Jeep Wrangler

1 Answer

What type of transmission do i have?


Your Wrangler is a YJ and the model is an "S". A Wrangler manufactured in 1987 through 1995 are all YJ's and then from 1997 through 2006 are all TJ's. The new Wrangler models are dubbed JK's.

Feb 22, 2009 | 1990 Jeep Wrangler

3 Answers

4 wheel drive problem on Jeep YJ


you can also check the 4 wheel drive vacuum switch on top of the transfer case...got mine for 10 bucks from parts store...fixed the problem

Dec 21, 2008 | 1992 Jeep Wrangler

1 Answer

92 yj front axle


it actually moves a shift fork onto a spline. try moving fork by hand.

Aug 05, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

792 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...