An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: heated seat 1996 jeep grand cherokee
C1 & C2 in your panel are most likely one of the culprits, if no power at heater at seat. Sounds like testing for power at seat switch is easier to do than get at these circuit breakers in the panel. If you have power at switch at seat, then it's not the fuse/circuit breaker. Good reading at this link for you.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First off, I would contact your local Jeep dealer and have them run your VIN # to check for any recalls. The 1999-2004 Grand Cherokees had a recall on the seat heaters. If your vehicle doesn't fall into the VIN # range then either your seat heater switch has gone out, or you have a broken element in the seat heater. I have replaced more seat heaters than switchsm the elements heat up and break. Hope this helps out.
If you have the owner's manual look up fuses in the index, good illustration. If you don't, I do. It shows a relay and a 15 amp fuse. Look at the passenger kick panel, pull the cover, and it is #2 fuse (second from the top on the left) The see the relay you may have to pull the panel (two screws and a clip) the relay is the third cavity down, third row from the firewal side.
Let me know if this works for you?
on the back of the fuse cover there are numbers and explantions of what each fuse is for with corasponding numbers on fuse in fuse box. same in fuse box under hood. as far as manual maybe a web site for chys.
There are two fuse boxes. One under driver compartment usually left to the steering colum. A label is stamp to identify each fuse. I would look at Park Lights and Instrument Cluster fuses. The easy way is to take a flashlight and look at all fuses. If they are all okay. Then just remove the Park Lights and Instrument Cluster fuse and reseat them. The other fuse box is under the hood and near the batter. It also has a label to identify each fuse.
Ok it is obvious since the light is coming on you are getting power to the switch. It could be a heated seat relay. Im fairly sure jeeps use a relay after the switch that is where I would start. Check and see if the Heated seat relay, and fuse are good