Question about 2006 Chrysler PT Cruiser

1 Answer

Brake lights will not turn off 2006 PT Cruiser

I removed all fuses to no avail, but if the battery is disconnected for a second an reinstalled the lights are off.

Posted by on

  • vnaff Dec 22, 2008

    I disconnected the wires to the switch and the lights went out, of course I don't have brake lights but they are burning all the time. Probably, a new switch will fix it.
    Many thanks


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Its hard to know what could be causing this, but in my chrysler there is a little button right at the top end of the brake pedal. Way in the front. You should regognicze it, if you follow the brake pedal stem up. Check to see if it is jamed, or shorting there. That would be my best bet.

Posted on Dec 21, 2008

  • Kelvin Neufeld
    Kelvin Neufeld Dec 22, 2008

    no prob glad to help

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Right head light doesnt work on 2006 pt cruiser


headlight could be burned out ! you will need to replace both headlights, just like all those people out there driving around with just ONE headlight !!!!!!!!!!!!!

Feb 02, 2013 | 2006 Chrysler PT Cruiser

1 Answer

2006 pt cruiser cant find oth fuse boxs


the fuse box, or TIPM (totally integrated power module) is located in between the air filter housing and the brake fluid reservoir.

Oct 04, 2011 | 2006 Chrysler PT Cruiser

1 Answer

My 2006 pt cruiser battery light is coming on. What does this mean?


There is a problem in the charging system. Either your battery is not holding a charge anymore, or your alternator is dead. The first thing to do is check the alternator. turn on the car and then remove the negative battery terminal. If the car shuts off immediately after disconnecting the battery then your alternator is bad and needs to be replaced. If it stays on, then your alternator is OK, you then need to remove the battery and go have it tested at your local auto parts store. Also have all the battery cables checked for corrosion as well, if they're hard and frayed then replace those as well.

Aug 03, 2011 | 2006 Chrysler PT Cruiser

1 Answer

2006 CHRYSLER PT CRUISER ...NO BRAKE LIGHTS,NOTAIL LIGHTS, THER IS NO FUSE FOR EITHER OF THESE...ARE THEY A RELAY. MANUAL SHOWS NOTHING...TOO LATE TO CHECK FOR POWER, BULBS OK...............HAS ANYONE...


yes. I had that problem caused by my trailer wiring harness. I had to replace the control for the trailer harness. It sent a code to the computer that had to be reset.

Mar 03, 2011 | 2006 Chrysler PT Cruiser

1 Answer

I need information on replacing the windsheild wiper switch on my 2006 Chrysler PT Cruiser


it is actually called the multifunction switch

fairly simple...
  • disconnect battery, but make sure you have your radio code or have installed a memory saver
  • remove shroud around steering column
  • disconnect multifunction switch
  • unbolt switch
  • replace switch
  • reverse to install

3b150c5.gif



Jun 03, 2010 | 2006 Chrysler PT Cruiser

1 Answer

I need a fuse box diagram for my 06 PT Cruiser


Rear Brake lights will not receive power from fuse box, checked all fuses and I need a complete diagram.
Thanks

Jul 16, 2009 | 2006 Chrysler PT Cruiser

1 Answer

2006 PT cruiser Battery warning light !


there is a flash for this probleem available from the dealer per tsb 18-007-07...if that doesnt take care of the problem you may have an issue with the charging system.

Nov 12, 2008 | 2006 Chrysler PT Cruiser

2 Answers

PT Cruiser Brake Light


The bulb in the rear light has burned out and to replace it follow these instructions: 1) go to your owner's manual to find out the part number. You can find and purchase the replacement bulb at Target, any auto parts store and even at Walmart for under $4.00; 2) pop open the trunk door; 3) get a phillips screw driver and unscrew the 2 screws holding the rear brake light fixture to your car body; 4) as soon as you turn over the fixture you'll see where to pull out the burned out bulb and replace it with the new one(s). Good luck!

Jul 14, 2008 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2006 Chrysler PT Cruiser Logo

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...