Question about 2000 Dodge Dakota Quad Cab

1 Answer

2000 dodge dakota sport blower motor won't work

Which fuses should I check first before taking the whole dash apart to replace the blower motor?

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    I would start at the last connection before blower motor for power with a 12 VDC test light first before I pulled a motor out, or poke into wires at motor housing if at all possible.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 731 Answers

Hi my name is Allen!

This is a very hard motor to get out!

This will save you time, if you have a test light and jumper cables, hook the jumper cables to the battery, then hook your test light to the positive side of the jumper cable, turn the ignition key on and turn the blower motor on. Next at the blower motor connector touch the test light to the negative side of the connector if the test light, lights up you have a good ground. NEXT; move the test light to the negative side of the jumper cable and test the positive side of the connector if it lights, you have power coming to the motor, if you have both power and ground you need to replace the motor, if no light on one side you need to repair the one that doesn't light up.

For further assistance contact me at FixYa!

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heat and air condition fan stopped working on my 2004 Dodge Dakota, does not blow, ice is comming in and i need to be able to defrost my windshield and heat my truck


First thing to check is the fuse. There will be one under the hood and another in the interior fuse box. The 2004 model does nt have a relay. If the fuse is good, you need to check to see if the blower motor is good. The motor is located under the glove compartment area of the dash, near the firewall. Disconnect the harness from the blower motor, and using jumper wires, apply voltage directly to the blower motor contacts. If the blower motor works, then the switch is bad. If the blower still does not work then the motor is bad.

Mar 04, 2011 | 2004 Dodge Dakota

2 Answers

The fan motor switch in my 1990 dodge dakota does not work. I have checked the blower motor out and the fuses out. and the resistor out. they all are fine. I am not getting any juice to the fuse box for...


Have you checked the blower motor resistor. Usually locate in the blower box with a plug on it. Has 2 bolts holding it in. Take out and inspect.

Nov 24, 2010 | 1992 Dodge Dakota

1 Answer

How do you take the dash apart on 2001 dodge stratus ? the fan blower has stopped working and i was told there is a relay under the dash.


dont really have to take the whole dash apart, its on the passenger side above the footwell area it is a blower motor resistor attatched to the housing not too aweful far from your blower motor

Jul 26, 2010 | 2001 Dodge Stratus

1 Answer

1997 dodge dakota sport, dash cluster quit working


Check the dimmer switch for the cluster lighting,it may be the problem.

Jul 13, 2010 | 1997 Dodge Dakota

2 Answers

Hi ya, i just inquired about my blower motor, is the relay and switches and everything under the dash or under the hood,


In the Dodge Dakota the blower motor resistor is located under the hood, on the right side firewall.

Dodge Dakota Blower Motor Resistor Location:

b3bc94a.jpg

Dodge Dakota with a complaint of no blower operation. After unplugging the harness connector and removing the two screws, you could remove and examine the resistor coils for damage. The heat and subsequent rust damage are clearly visible in the picture below.

6f6f301.png

Apr 07, 2010 | Dodge Dakota Cars & Trucks

1 Answer

1992 Dakota heater problem??


The fan generally is located under the dash on the passenger side... while you are there you will notice a couple wires plugged into the side of the duct work near the fan... that's your resister block for the fan speeds... it's likely failed... remove the two or three screws holding it in... unplug the connecter and replace it.

Robert

Jan 16, 2009 | 1996 Dodge Dakota

2 Answers

Heater/Defroster 2004 Dakota


replace the resistor that should fix it

Oct 27, 2008 | 2004 Dodge Dakota

Not finding what you are looking for?
2000 Dodge Dakota Quad Cab Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...