Question about 1995 GMC Sierra

1 Answer

Getting water in Blower housing

I have water getting into my blower housing of my 95 GMC Sierra. The water froze the blower fan, burned it up and I had to replace it. I did notice it until I pulled out the old blower. For some reason I'm still getting water in there. Why is this happening? Please help. Thank you.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Is it JUST water or antifreeze and water combined? If it is JUST water, it is probably condensation form the A/C (too much is a problem) if it is mixed, I would definately say cracked heater core. That is about the only place it can come from. Good luck

Posted on Mar 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed new resistor and connector and speed 5 won't work on blower on 2005 gmc sierra


High speed on the blower fan does not work thru the resistor.
There is a seperate circuit that sould feed 12 volts directly to the motor. If you have access to a schematic it would help.
The connectors for the high speed, burn out a lot. If you cant find I could look it up.

Oct 22, 2013 | 2003 GMC Sierra 1500

1 Answer

How to replace blower motor on 1994 gmc sierra


My fan motor quit working. Is there a site I can get pictures and instructions to replace myself. Thanks.

Feb 19, 2012 | 2000 GMC New Sierra 1500

1 Answer

2004 sierra, fan blower stopped, not the fuses. where is the fan blower switch and how do I replace


get a voltmeter; check for 12vdc at the blower motor with the blower turned on; if there is voltage, the blower motor is bad; should be located behind a panel underneath the dash on the passenger side; if the fan works on 1 or 2 speeds, it is probably the blower resistor located in the same area as the blower; u can check utube for details

Jun 27, 2010 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

2004 GMC Sierra 4dr truck. the fan does not work


The switch or the wire harness at the blower motor has gone bad. The highest setting 5 has no resistor, so the blower runs on high but the high current flow ends up burning up the switch's contact on that setting or the resistor wire harness at the blower motor has gone bad. Common would be the switch it self, if the switch is good. Then it's going to be the wire leads at the speed resistor by the blower motor under the glove box by the passenger leg compartment. Keep me posted, be glad to help you get your Sierra running 100% again soon.

Jan 06, 2010 | 2005 GMC Sierra

1 Answer

My fan selection only works on selection 4 and 5 what do I need to fix it?


replace the blower motor resistor this is the main cause of blower settings not to function. the resistor will be located on the blower motor housing. follow the wires from the blower motor to the resistor

Jan 01, 2010 | 2000 GMC Sierra

1 Answer

My blower fan only works on high


you will need to order a blower resister its easy to swap out

Dec 11, 2009 | 2000 GMC Sierra

2 Answers

2005 GMC Sierra - 1. started out with blower


Have you had the blower motor switch replaced? I had a Chevy Silverado and the low worked but no other settings. It is a pretty quick fix and reasonably cheap.

Oct 23, 2009 | 2005 GMC Sierra

1 Answer

1996 GMC 2500 Sierra Blower motor cover Removal


If there are no Bolts or Screws around the Housing, Squeeze the Housing and see it there are not Mounting Slide Tabs for the Cover. I own a 95' Silverado But, Have not changed the Blower Motor in 10 Years. I know that it is Easy to Remove though.

Jan 24, 2009 | 1985 Buick Century

1 Answer

Where is blower resistor located on a 95 GMC, how to install?


yes you have to take out the dash and the glove box to get it out. its on the passenger site in a black plastic housing.

Dec 16, 2008 | 1995 GMC Sierra C1500

3 Answers

1998 gmc sierra blower motor runs Intermittently


does anyone know what the problem is???? 1998 GMC Sierra blower motor problem.... when fan is turned on it works fine then all of a sudden it makes a loud screeching noise and sounds like its gonna blow up, does it on all speeds. please help

Dec 06, 2008 | 1998 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...