Question about 1992 Toyota Camry V6

1 Answer

1992 Camry 4 Cyl - 1 plug very oily and fouled out

I've had this car for 1 year and it ran perfect until I loaned it to my son for 3 weeks. He ran it very very low on gas (probably more than once).

Now it seems to be running on 3 cyl. Stutters and stumbles badly.
Changed the plugs and fuel filter and it ran good for about 5 minutes, then started running bad again.
1 plug is very oily. The other 3 plugs look fine.

Could a clogged injector be the reason for this?
If so, can they be taken out and cleaned ?
Any special tools needed?

What else could cause this problem?

Thanks

Posted by on

  • sysopsdan Dec 28, 2008

    Thanks for the reply toyotek . It seems the plug in question is oily both on the outside AND the electrode.



    Thanks Kdawwgg0609. Do injectors have to be replaced? Can injectors not be taken out and cleaned?



  • Peter Antonelli May 11, 2010

    is the plug oily on the outside or are the electrodes oily?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

With the car being as old as it is. it is very possible fhat the injector is plugged. the only way to find this out is to place it. then if you still have the same problem with the plug getting oily. theres a good chance the rings in that cylinder are going out and letting to much oil through fouling out the plug

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the cylinder order for a 4 cylinder toyota camry


It is 1-3-4-2 with No 1 being at the timing belt and crank pulley end.

Jun 09, 2014 | 2001 Toyota Camry

1 Answer

I have a 1997 Toyota Camry 4-Cyl. I need the plug wire firing order on the engine and the cap. I think I may have crossed my new plug wires.


Here you go free of charge curtorsey About.com I do not have a photo of the distributor cap. Just turn the engine over until the #1 piston is at TDC on the compression stroke and the rotor will be pointing at the #1 piston. Connect that to the #1 plug and then connect the next on to the # 3 plug going counterclockwise, then 4 and finally 2. 53f57a7.png

Oct 11, 2010 | 1997 Toyota Camry

1 Answer

I need a spark plug wiring diagram for a 1992 Toyota Camry, 4 cylinder, 2200 motor.


I believe your firing order is 1-3-4-2. You may see a number 1 on the distributor cap on this vehicle. That is the #1 plug wire. The wire hole next to that would go to spark plug 3 etc. Easiest way is to change wires one at a time. Hope this helped.

Mar 29, 2010 | 1992 Toyota Camry V6

3 Answers

I need a spark plug wire diagram for a 1992 Toyota Camry 4 cylinder


1992 Toyota Camry Sedan
3.0 liter DOHC V-6 (3VZ-FE)

Cylinder # Front, passenger to drivers side 2-4-6
Cylinder # Back, passenger to drivers side 1-3-5

Distributor 12 O'clock post # 6 cylinder
10 O'clock post #1 cylinder
8 O'clock post #2 cylinder
6 O'clock post #3 cylinder
4 O'clock post #4 cylinder
2 O'clock post #5 cylinder

Good luck and hope this helps.

Jan 12, 2010 | 1992 Toyota Camry V6

1 Answer

Help Me With 92 Toyota Camry LE 4 cyl...


should be a 14mm drain plug on the oil pan. you remove that until no more oil comes out. then put drain plug back in. it should be the only 14mm bolt on the bottom of the pan. then you will have a oil filter below the exhaust manifolds than needs to unscrew. replace with a new one. then fill your engine with 1 gallon or 4 quarts of oil.(same thing) thats all you should need.

i dont know but if you learngin how to work on cars thats a nice car to learn on. it pays off to repair your own car in the long run. you save so much money. :) GOOD LUCK!

good luck,
Michael

Apr 23, 2009 | 1992 Toyota Camry V6

1 Answer

91 toyota camry 4 cyl. It will not start even with


Hi Mike
Try lightly tapping the starter with a spanner and at the same time turning the key to start, if it starts you need the starter overhauled.

Regards Gary M

Mar 25, 2009 | 1991 Toyota Camry

3 Answers

1992 toyota camry


hello i have a 1992 camry 4 cyl. i did a tune up on it(spark plugs & wires,air filter,fuel filter,dist. cap rotor) engine light is on now. It shuts off after 5 minutes of driving or idle. could it be a sensor? if so what type? thanks
JC-

Aug 29, 2008 | 1992 Toyota Camry V6

Not finding what you are looking for?
1992 Toyota Camry V6 Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...