Question about 1991 Pontiac 6000

1 Answer

I have a 91 pontiac 6000, I replaced the alternator and now I cant put the belt back on, I need a diagram of it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Hi,

you need a Belt Tensioner Serpentine Tool, to lift the Arm and replace the Belt,
disconnect negative Battery Cable, first!

connect Serpentine Belt, starting at bottom crankshaft, work belt, up the belt rotates toward, Radiator , so the Belt, goes under the Water Pump, and under the Belt Tensioner.



Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram for 5 pulley belt 98 pontiac transport.


start from bottom crankshaft pulley and ac compressor turn belt tensioner counterclockwise or lift forward then run pulley belt around crankshaft pulley and around AC compressor,run pulley belt around power steering pump then around alternator,once drive belt around alternator you done make sure drive is center of crankshaft pulley and AC compressor pulley.and belt back is center against water pump pulley before releasing the belt tensioner.

Aug 27, 2012 | Pontiac Trans Sport Cars & Trucks

1 Answer

I'm not sure how to replace my alternator belt easy question I hope.


Its a simple question lol. By the alternator there should be an adjustment arm, it allows the alternator to be adjusted and move up and down. If you look at the alternator area you will see what all holds it together. The bottom bolt that holds the alternator in place doesn't need to be messed with. You may have to loosen the top bolt, but loosen the adjuster and push the alternator down to slide the old belt off and install the new belt and tighten everything back up. Adjust the adjustment arm to tighten the belt to spec.

Jan 16, 2011 | 1986 Pontiac 6000

1 Answer

How do you change the alternator belt on a 1996 Pontiac Bonneville? need a diagram to put belt back on.


Engine size please?

otherwise look here

http://www.fixya.com/uploads/images/42FF945.gif

Mar 10, 2010 | 1996 Pontiac Bonneville SE CA Value

2 Answers

REPLACE SERPENTINE BELT ON 1997 PONTIAC SUNFIRE


give these websites a try www.alldatadiy.com and www.autozone.com and drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.

Nov 12, 2009 | 1997 Pontiac Sunfire

1 Answer

I need a belt diagram for a 91 Geo Metro. I am replacing the alternator belt, but need to get the first belt off.I do not know where the belt tension adjustment bolt is for the first belt.


I believe the air conditioner belt tensioner bolt is underneath the mounting bracket on the compressor, then you can remove the alternator belt by loosening the two bolts from underneath on the alternator then loosen the top bolt and be careful prying the alternator inward to loosen the belt you can short a wire connection. Remove one of the battery cables to be safe!

Sep 24, 2009 | 1991 Geo Metro

1 Answer

Need serpentine belt diagram for 2002 Pontaic Sunfire


CLICK HERE

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 18, 2009 | 2002 Pontiac Sunfire

1 Answer

I need the to know how to put my belt back on


There should be a digram under the hood other wise ya might need a mechanic to put it back on if all elese fails try going to napa they might have the digram in a book 4 ya good luck

Jan 07, 2009 | 1997 Pontiac Grand Prix

1 Answer

91 pontiac 6000


use a half in. breaker bar and i think a 15 mm socket and put that on your tensioner pully and push counterclock wise. It helps if you have someone ther to hold that pulley while you route the belt, but thats not necessary. Start at the top and go clockwise and the pulley you need should be the 6th one. about the 9 oclock postion. If you need help with the routing, there usually is a picture located under the hood either on the fender wall or in that area. Let me know if you need more help. Good luck and rate this info so I know if I have helped you> Thanks

Dec 21, 2008 | 1991 Pontiac 6000

1 Answer

91 pontiac


0916d38.jpg Hope this helps this is from 1991 pontiac 6000le

Dec 21, 2008 | 1991 Pontiac 6000

Not finding what you are looking for?
1991 Pontiac 6000 Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...