Question about 1993 Ford F150 SuperCab

1 Answer

1993 f150 4x4 manual tranny will not shift out of gear

I was driving along on the highway when i came to my exit i stoped and it started to grind going into 1st and 2 nd gear so I got back onto the highway and it shiffted through the gears fine.So when I got back off the freeway when I shiffted into 2nd gear It was like I was in nutral same for fist. By the time Igot home I tried to get it into 2nd and finnaly it shiffted but was stuck. so i called someone and they unpluged a wire and pluged it back in so I could get in nutral but nothing else. I was just wanting to know what could be wrong. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You might try checking your transmission for broken gears that may have eaten the teeth away on it when your gears started grinding or broken off several things down inside there

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinding noise when in gear


Sad to say but you will be needing to get a new transmission ..

Sep 17, 2015 | 2004 Chrysler Town & Country

2 Answers

Hi, My name is Mike and I am currentyl having tranny problems with my 2002 Silverado 2500HD 2WD 6.0 4l80e. I bought the truck knowing it had tranny problems and the issue was once the tranny would warm up...


you sound like you know what you are doing so excuse me for thinking out loud-if it were me, I would really carefully check the cable and the pawl to see that it is adjusted properly-because it sounds like either that or possibly the harness is not connected or there is a wiring problem.

Jul 20, 2011 | 2002 Chevrolet Silverado

1 Answer

I purchased a 96 Metro 1.3L 5 speed about a year ago, and it was hard to get it into gear, and it would often pop out of 3rd gear when driving. Now I have trouble going from first to second without...


your best bet is to get a tranny from an auto wrecker, and replace the clutch while you're at it. If the tranny is that problematic, it's not worth fixing. The clutch kit, which includes the disc, release bearing, and pressure plate, would be under $150, and a used tranny probably $100. Try and find one with reasonably low mileage. Good luck.

Jul 04, 2011 | Geo Metro Cars & Trucks

1 Answer

I have a 1997 Ford F-150 Lariat, and when pulling a trailer it makes a chattering noise when the gas pedal is pressed down to pick up speed. When going up a hill it will not go passed 40 mph and starts to...


If tranny is manual shift you may have a bearing and or bad gear. Try changing tranny fluid. Check manual for correct fluid may use tranny fluid rather than gear oil. I recommend using Royal Purple fluid or gear oil. This very expensive but will slicken up the shifting and extend bearing and gear life.

May 14, 2011 | Ford F-150 Cars & Trucks

1 Answer

1994 325 BMW shifting from 1st - 2nd gear is hard and grinding noise, does this indicate a posssible issue wth the gear box, clutch, or .......


unfortunately yes it does.its sounds like your 2nd gear synchro is out.unfortunately your tranny needs to come out to fix it.does it only between 1-2? or other gears? if all gears your cutch is goin but just between 2 specific gears a synchro times the gear teeth so they lock in and its off and teeth on the gears are the grinding you are hearing.sorry to have to tell yah that one.i always loved my old 325 is model always fun to drive.

Nov 24, 2009 | 1993 BMW 3 Series

1 Answer

Transfer case


The shift solenoid is not controlling the gearing and selection. Should have it ck'd out before it puts you through the windshield. Good Luck. It's more than likely just the solenoid floating.

Sep 16, 2009 | 2004 Chevrolet Avalanche

2 Answers

Harsh grinding noise while in gear and car won't drive!


Had the exact same thing in my 93 and it was the CV Axles - they have a C clip that hold them in place - sometimes the C clip and fail; sometimes you simply have to replace the CV Axles - much cheaper then a tranny; a good suspension shop should be able to diagnos w/o it costing you an arm and a leg.

Jun 15, 2009 | 1993 Geo Prizm

1 Answer

MY 1993 dodge dynasty will drive forward for about a block and slip out of gear, you can then pull over stop the car and put it in park and then start the car again and it will go another block. It will...


You are going to need to have the trans pulled again. There aren't any electrical problems that can cause no reverse. Also it sounds like the 2/4 clutch is burnt and when it slips it puts it in limp and 2nd is gone. Hopefully the shop that did it in July will help you with a warranty.

Mar 24, 2009 | 1993 Dodge Dynasty

1 Answer

1995 Chrysler lebaron gt justquit going


tranny gone. it might be repairable but the transmission must come off.... likely either the main input shaft from engine or one of the primary gears in ther tranny.,

Jan 01, 2009 | 1995 Chrysler LeBaron

1 Answer

Not able to shift gears without grinding pedal is very spongy


IF ITS A 5 SPEED OUR CLUTCH IS NOT WORKING VERY GOOD ITS NOT STOPING THE TRASMISSION THAT WHY YOU GRIND GEARS

Aug 25, 2008 | 1996 Honda Passport

Not finding what you are looking for?
1993 Ford F150 SuperCab Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...