Question about Mitsubishi Lancer

1 Answer

Hi,im have misfire on a mitsu. GDI INJECTOR &COIL IS GOOD?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

Mechanical electrical or fuel to one (or more 0 cylinders..do leak down test/compression test and advise ..need to know basic mechanical health first

Posted on Dec 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GDI. Why is there misfire and idle fluctuation?


code p 0300 determines misfire causes as the following=== causes --engine mechanical fault ---wiring---ignition/ fuel system---injector ---ECT/MAF sensor--- ECM
You have two areas to check
one is the MAF sensor as it will cause erratic idling and second the injector or HT leads to a plug
If you run the fault codes you will get a p 0301or 2 or3 or 4 code and that is the cylinder number that is misfiring--code p 0300 is random /multiple misfires and the causes are the same including low fuel pressure and low compression

Dec 17, 2015 | 2004 Mitsubishi Lancer

2 Answers

Fixed spark plugs,wires, coil packs, and fuel injectors and still reading a p0300 code random/multiple misfire any suggestions?


Hi William:
Sounds like you've about covered the workers.
How about the boss?
CPS?
Cheers.

Nov 11, 2015 | Cars & Trucks

2 Answers

Mitsubishi galant misfire 303 code all brand new components


You might try looking at all vacuum lines for a leak. This could cause a lean misfire.Look at the plugs,if very white,could indicate lean condition. listen very carefully for a hiss and follow to the leak. The problem you describe could also be a cat converter failure. Typical on mitsu. Good Luck...SMP

May 01, 2014 | Mitsubishi Galant Cars & Trucks

1 Answer

Misfire in number 3 and number 4 cylinders


Misfire is not always from coil. It could be from spark pug wire and injector.
Solution:
-Test the injector at the misfire cylinder. Is it within specification...?
No.>>> The injector is bad. Replace new one.
Yes. the injectors are good and within its specification.
-Check the plug wire. it might be broken and spark to ground or too much resistant. If so replace it.

Mai Lor

Feb 24, 2013 | 2005 Ford Taurus

2 Answers

Volvo s40 1.8 gdi excessive fuel consumption


You're going to have to figure out what's causing the misfire. The car is almost 10 years old, so change the plugs to start with. If you still have a misfire, go to auto zone and have them pull the codes to find out which cylinder is the issue. Then figure out fuel or spark? Coil or injector? Was there a lean code? Check for a vacuum leak. Change the fuel filter and air filter for maintanence. The cruise control may be another issue.

Aug 06, 2009 | 2001 Volvo S40

2 Answers

2001 ford taurus p0301 and p0303


You are mis fireing on cyl 1 and 3 if you replaced plugs and wires and coil this is going to be a fuel injector issue or valve issue. See if you can swap the injectors with known good cyl. and see if it changes. Or have a shop do a fuel injector service on it to see if it helps. It may be to late for the fuel injector service.

Mar 01, 2009 | 2001 Ford Taurus

1 Answer

2000 dodge intrepid engine light on, power loss, rough idle


P0304 Cylinder 4 Misfire Detected P0354 Ignition Coil 4 Control Circuit P0204 Injector 4 Control Circuit You need to check injetror wires an coil wires .If good, The new coil my not be good.The Injector my be bad. If good it the ECM Check all fuses.

Jan 15, 2009 | 2000 Dodge Intrepid

1 Answer

2001 hyundai sonata 2.4 dohc, cylinder 3 misfire code


tried testing the igniter also i would look into the injector, that will cause a single cylinder misfire and probably is your problem?misfires are not noticeable at higher speeds, which im sure you know but i would go that route, could have a pinched injector or a stuck one. one easy way to test is swap 3rd injector with another and see if that one starts misfiring instead, another rought is to get a cheap auto stethoscope and put it to each injector to hear if its opening and closing, compare with others. good luck.

Dec 11, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

67930 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...