Question about 1993 Ford Crown Victoria

2 Answers

I have a 1993 Ford Crown Victoria LX missing the drivers window. I have a replacement window but cannot figure out how to get it in. Does it slide in from the top, or can the metal frame be removed somehow to put the window in?

Posted by on

  • apfrancis Dec 21, 2008

    Thank You! We knew about the need to remove the rivets, we were having a hard time figuring out how to get the replacement window IN the door.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Do not try to replace your window by your self if you don't know how to do it perfectly...instead try a car door expert ...it will not cost you much and after work is done you will be 100% satisfied

Posted on Apr 01, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

After removing your door panel you should look for rivets holding your glass or motor if equipped with power widows.The window slides down but you may have to pull the window molding aside for easy installation.

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 V8 4.6l. It turns over, but why won't it start?


Part 1 -How to Test the Starter Motor (Ford 4.6L, 5.4L)

troubleshootmyvehicle.com > Ford > 4.6L, 5.4L
Mar 2, 2011 - Page 1 of 3: How to test a BAD Starter (Ford 4.6L and 5.4L Pick Up and SUV). ... a BAD starter motor on your 4.6L or 5.4L V8 equipped car, pick up or SUV. ...and will turn over the engine; -OR-; The starter motor won't do a thing. ... Crown Victoria ... 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005.

Question: 1997 Crown Victoria Lx Cant Turn on and Cant ...

www.2carpros.com/.../question-1997-crown-victoria-lx-cant-turn-on-an...
May 26, 2014 - Ok so i put the keys in the car turn the key but seems to me it moves more ... 1997 Ford Crown Victoria • 4.6L V8 RWD Automatic • 99,625 miles ... Keywon't turn off accessories or turn car over and ignition cylinder turns too ...

Oct 19, 2015 | Ford Crown Victoria Cars & Trucks

1 Answer

Just need info about changing transmission oil in 1996 Ford Crown Victoria LX. I'm not familiar with type of Transmission oil to use


ford does have their own type you can get it at any parts store just tell them what it's for also at Ford

Aug 27, 2012 | 1996 Ford Crown Victoria

1 Answer

How to replace 1993 Ford Crown Victoria starter


The starter will be under the car on the passenger side. You will need to raise and support the vehicle. There will be two bolts that hold the starter onto the transmission. Remove those two bolts and lower the starter. You can then remove the positive cable end and the smaller start terminal wire. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 26, 2012 | 1993 Ford Crown Victoria

1 Answer

How much antifreeze does my 1993 Crown Victoria LX take?


i usually fill my mine to fill level which is right at thick line on container

Sep 11, 2010 | 1993 Ford Crown Victoria

1 Answer

How can i unlock the back driver side door when the power lock is out and the pull tab is missing on a 93 crown victoria.


remove the inside panel of the door and you should be able to get to the blocking mechanism

Mar 13, 2010 | 1993 Ford Crown Victoria

3 Answers

94 crown vic driver power window does not work can


The window regulator can be broke. Its made of plastic and they break often.

May 03, 2009 | 1994 Ford Crown Victoria

2 Answers

Driver Side Front Window Replacement


You just drop it down from the top at a slight angle. Then put the bolts back in and check to make sure that it moves freely.

Dec 21, 2008 | 1993 Ford Crown Victoria

1 Answer

2004 crown victoria lx smashed driver side window


normally you have to loosen the track and it comes out as one whole assembly stop by a dealer in the parts department and ask them to print out a diagram or show them the part you are having the problem with

Aug 27, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...