Question about 2002 Toyota Tacoma
2002 toyota 4cyl,2.7, auto,4x4 wont idle or remain running without pumping gas pedal, this happened without any warning, no problems with vehicle ever! 82,000 mi. I did recently blow something electrical while plugging cell adapter in and found no fuse(s) that were in need of replacement. could find no vacuum lines or anything obviously disconnected please help. 222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
I just received a message about your problem; I would like to try to help you, if you still have the problem. Please respond.
Important note: If you click on the "apply a rating", at any time during our back-and-forth interaction, our conversations will be terminated. This is a design feature of this site.
Posted on Dec 23, 2008
you may look into what is called a throttle position sensor. it basically monitors the position of the throttle and tells the fuel injection what to do. if it goes bad, the car will stall and won't run unless you give it more gas to keep the rpm's up. the throttle position sensor is typically located on the side of the throttle body, right near where the air intake hose joins the engine. they are relatively inexpensive , available at any car parts store and easy to replace.
==========================check: 1.idle speed adjustment screw, 2.vacuum leaks, 3.ignition timing,4.carburetion problems,5.emmision vapor charcoal cannister clogged,6.dirty fuel filter,7.fuel pump not working right,8.dirty air filter,9.pcv valve bad. ================== On the back of the carb is an idle stop solinoid that shuts off the air flow through the idle passage way. I have found that the passage way can be blocked with dirt. Remove the solinoid and spray carb cleaner in the solinoid hole then blow out with compresed air. Be sure that the rubber O ring for the solinoid comes out with the solinoid and is not stuck in the hole first. Also check that there is 12volts going to the solinoid when the key is on the run position. This is somtimes fed through the alt. fuse.
================= Loose Hot Wire to control box for electronic controlled Carburator.
Posted on Dec 21, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 02, 2012 | 2002 Toyota Camry
Nov 16, 2010 | 2002 Toyota Tacoma
Mar 27, 2010 | 2002 Toyota Tacoma
Jun 20, 2009 | 1998 Toyota Tacoma
May 31, 2009 | 1995 Toyota Tacoma
Mar 15, 2009 | 2001 Toyota Tacoma
Dec 21, 2008 | 2002 Toyota Tacoma
268 people viewed this question
Usually answered in minutes!