Question about 2004 Chevrolet Cavalier
HOW DO I CHANGE THE FUEL PUMP
Lift back seat and their is an access cover to fuel sender unit that houses the fuel pump as well.check connections as well as often the pump is ok but the wiring connection is burnt
Posted on Dec 20, 2008
To change the fuil pump you have to lift the car on to ramps or jacks and take the tank out.
Posted on Feb 02, 2009
Before you pull your fuel pump check the easy stuff first like fuel filter i just repliced the one in my wifes car and it ran great and i had no fuel presure at the fuel rail abd though it was the pump
Posted on Mar 16, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: fuel pump
2004 Cavalier it is in front of the gas tank under the body. If you put the car up on ramps or stands and get under it from the back it is easily visable.You must drop the fuel tank and then replace the pump per instructions that come with the new pump.
Posted on Jan 08, 2009
you will have to drop the fuel tank ,remove the straps while supporting tank,remove fuel lines and vent lines,lower to ground ,remove ring that holts pump ***. in tank.Be certain to change filter and strainer
Posted on Mar 26, 2010
What motor is in the 04 Cavalier? If it’s the Eco Tech 4, you need to remove the black cover on top of the engine to access the plugs. Once you remove this cover you will see the coils and the wires for the plug are attached to this cover. Gently remove the plug wires and disconnect the electrical connector from the coils. Set this assembly aside. Using an extension and the correct size spark plug socket. Remove the plugs. With the new plugs check and verify the gap is correct prior to installing the new plugs. One the correct cap has been set, install the new plugs. It is recommend to use a piece of vacuum hose to start the threads on the plugs as to not cross thread the new plugs. One the plugs threads are started use your wrench to tighten the plugs. Do not over tighten as you can strip out the threads. Then reinstall the wires and connect up the coils, reinstall the cover and start the engine. Make sure there is no check engine light and the motor is running correctly.
Posted on Dec 06, 2009
Tips for a great answer:
Mar 10, 2016 | 2004 Chevrolet Cavalier
Oct 18, 2012 | 2004 Chevrolet Cavalier
Oct 15, 2011 | 2004 Chevrolet Cavalier
Nov 18, 2010 | 2004 Chevrolet Cavalier
Mar 26, 2010 | 2004 Chevrolet Cavalier
Jun 06, 2009 | 2004 Chevrolet Cavalier
Mar 21, 2009 | 2004 Chevrolet Cavalier
Mar 17, 2009 | 2004 Chevrolet Cavalier
Aug 09, 2018 | 2004 Chevrolet Cavalier
3,427 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: