- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The P0327 means Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor). the knock sensor is located in the front of the engine located behind the oil dip stick just to the left. _______________ Ktag K-TAG
the light is located on the sides of the number plate,if you look to the sides of the reg plate you will see plastic covering the light you can remove it by opening trunk to see how to remove the cover on the back to get to the globe,its common for them to not work after time just need to replace the globes
I don't think you'll need to take off your bumper to replace your tag lights... I've never heard of a car needing that... you should be able to push the tag lights to one side along the length of the light and it should be able to be popped out and then there's just a harness hooked up to the light housing