Question about 2005 Chrysler 300

2 Answers

My chrylser 300c want move in drive and it doesnt go over 20mph

When i first got the car the rear wheel jump or **** sometime...now the car want even move when i hit the gas in drive..it slowly gets up to 20mph and just the motor rev up...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

This sounds like your rear differential is failing in your transmission.

Posted on Jan 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

You have a fuel injector problem. It is a known problem to Cryslter. Unless you are a very experienced mechanic, I am not going to recamend you try this one on your own. I have some first hand knowledge of this exact situation.

tepfy.

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Mountaineer 2 wheel drive, 6 cyl hard to shift when parked on incline or decline and doesnt feel like shifting into overdrive. Sometimes jump a few inches when put into reverse. Any thoughts.


Yes when you park on an incline you should always put your emergency brake on before shifting to park. Then whenyou are ready to move again put you car in gear before disengaging the emergency brake. this will remove the stress from the transmission.

Sep 12, 2013 | 2005 Mercury Mountaineer

1 Answer

I changed the rear wheels on my frontera an now the 4 wheel drive has a really bad clunk when you go down hill but not up it sounds like it wants to jump out of 4 wheel drive but doesnt why is this?


sound like you may have put different size tires/wheels on the rear than what is already on the front. It is critical that the front and rear wheels are the same size.

Jan 21, 2013 | Cars & Trucks

1 Answer

My 2000 dodge Durango is making a loud humming noise. When you go over 20mph. It feels like it is under my feet when I am driving and my steering wheel is vibrating. Any ideas what it nay be.


Check the front tyres for hi / low spots, flat spots, bulges. Try rotateing your wheels front to rear & see if the steering vibration disapears & noise move to rear.

Jun 29, 2012 | Cars & Trucks

1 Answer

Have a strange humming noise that can be heard


Hi:
Often "humming" noises like what you are experiencing are caused by a failing bearing somewhere. Some usual suspects are wheel bearings, alternator bearings, and sometimes even your waterpump, but usually it starts leaking too. To start narrowing down what it is, have someone ride with you to see if the noise is coming from left side or right side, or engine area, then see if it happens when the car is not moving, or just when the drive wheels are pulling the car? This way , hopefully you can pin point the culprit!

Mar 26, 2010 | 1999 Volkswagen Golf

2 Answers

The car jumps when the wheels are turned left or right


you need to have the front axles checked or replaced,they are not freely turning

Dec 28, 2009 | 1998 Jeep Grand Cherokee

1 Answer

How do I shift into four wheel drive?


I've seen some that can be shifted while in park, but generally even when that is possible, it is always better to shift while rolling at a slow speed (under 20mph). When all components are turning, it's easier for them to properly engage without grinding.. If after you are finished using 4x4, the front axle does not disengage, you can usually get it to do so by disengaging the shifter, then backing up for about ten to twenty feet.

Dec 12, 2009 | 2002 Jeep Liberty

2 Answers

2001 and 2002 jeep grand cherokee. while making hard left hand turn experience rumbling sound doesnt happen when driving straight or right turns. Cant decide if sound is from front or rear area


Try checking the bearing in the left wheel if the rumbling is on the left side. Sometimes bearings can be worn down and sometimes may even twist or bend.

Aug 21, 2009 | Jeep Grand Cherokee Cars & Trucks

1 Answer

My 95 lhs wont start in hot weather and stales out cold


Also replace the camshaft sensor and fuel filter.

May 09, 2009 | 1995 Chrysler LHS

Not finding what you are looking for?
2005 Chrysler 300 Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...