Question about Ford Focus

1 Answer

Need to know what po303 code is and how to fix it?

It is a 2000 Ford Focus SE. How would I fix this problem?

Posted by on

  • 4 more comments 
  • cbecker2006 Dec 20, 2008

    It is running real rough but thanks. I got it fixed now or at least I hope. It is getting fixed.

  • cbecker2006 Dec 20, 2008

    it was a bad plug. We replaced all the plugs so lets hope that will fix the problem

  • cbecker2006 Dec 20, 2008

    anytime all and thanks for all your help

  • Mike Butler
    Mike Butler May 11, 2010

    Thanks for letting us know for sure.

  • Mike Butler
    Mike Butler May 11, 2010

    What did you find , bad wire , bad plug , or maybe both?

  • Mike Butler
    Mike Butler May 11, 2010

    How is the car running currently?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Cyl. 3 missfire. check your plugs or the coil and boot.

Posted on Jan 04, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to know where in a 2000 Ford Focus SE DOHC-Zetec 2.0l engine the Fuel pressure sensor and the valve actuator are. Thanks.

valve actuator ????? Fuel pressure sensor ? Can you explain these alittle better ? Fuel rail pressure sensor, or fuel tank pressure sensor for the Evap emissions , Valve actuator - purge valve or vent valve for emissions . Did you have Code's ?

May 27, 2018 | Ford Cars & Trucks

1 Answer

Hesitation on the 2003 ford focus

Hello! #1...I need to know if the Check engine Light is on...If it is, take the vehicle to an Auto Zone or Advanced Auto (any auto parts store) and they, for free will read the code/codes...send the trouble codes to me and I'll fix your Focus...#2 tell me which engine is in the car; give me the sub model ie...SE, ZTS....etc...If there isn't a CEL tell me....Guru...Saailer

I’m happy to help further over the phone at

Dec 14, 2011 | 2003 Ford Focus

1 Answer

I have a 2000 ford focus SE i need to know where the fuel pump relay is located

Hello, There is a Recall for the fuelpump and the Warranty is for 10 Years. It is Recall 03n01. You will need to give the Vin# to the Dealer. I believe with a complete failure, you may be compensated for the tow. It would not hurt to ask about it.

Jan 23, 2011 | 2000 Ford Focus

2 Answers

I have a 2000 ford focus se it want stay runnig unless you hold the gas pedal down as soon as you let the gas go it stops running i changed the fuel filter did not help

first of all, if light is on have it scanned for a problem code. if no scanner all auto parts stores will scan for free. there has been over 200 recalls for 2000 ford focus, check with ford to see if this is one of the problems. god bless, this is a long run, but check and see if fuel is getting to fuel pressure regulator.

Aug 14, 2010 | 2000 Ford Focus

1 Answer

My 2000 ford focus se read p1120. already replaced the throttle position sencer but still shows p1120 code

does your engine idle fast or slow? You may need to clean the idle selonoid or the throttle body. They carbon up and stick.

May 22, 2010 | 2000 Ford Focus

1 Answer

Y is my ford focus se year 2000 is not trowing cold air

AC freon is low and/or you have a leak in the system. Take it to a mechanic that can fix AC systems.


Apr 21, 2010 | 1995 Mercury Cougar

1 Answer

I got a camshaft position sensor malfunction code P0340 from my code reader and needs to know how to repair the problem for a 2000 Ford Focus SE. My car will not crank.

it sounds like you have bigger problems if your car does not crank(turn over) then your timing belt could have broken and the one piston could be hitting a valve causing it to be locked up.normally when any sensor is bad car engine still cranks it just doesn't start.

Jan 28, 2010 | 2000 Ford Focus

1 Answer

Break fluid 2000 ford focus se

brake fluid goes in the resevoir which is on top of the master cylinder,it also supplies the clutch as well,if you think you have a problem take car to a garage as playing with something your not sure of could cause a fatal accident

Dec 09, 2008 | 2000 Ford Focus

1 Answer

Ford Focus 2000 Wagon SE Rear Whiper

Try the right hand stalk. It should move backwards and forwards to switch on and off the rear wiper.

Nov 15, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

83851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides