Question about 2000 Chevrolet Silverado 1500

1 Answer

Chevy silverado 2000 serpentine belt replacement?

Hi, you offered to help someone with a ford 250. I got a chevy, but haven't changed a belt since they were "fan" belts. Help? I'll rate you. thanks Mike

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Mike, the belt routing should be on a sticker under your hood, these use a spring belt tensioner and it is easiest to us a 3/8 or 1/2 breakover to pull the tensioner back then the belt is easily removed and replaced, please do not rate me at all if it is not a fixya, thats the only reason do this is for my score. Thanks, and merry Christmas.

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a routing diagram for a 2004 ford e-250 carrier coach van


there should be a decal under the hood somewhere that shows the belt routing.

Aug 28, 2014 | Ford F-150 Cars & Trucks

1 Answer

Changing serpentine belt on 2000 chevy silverado 1500 4.8 v8


The belt has tension applied to it from an idler pulley arm. you need to release tension by using a socket and ratchet on the nut on the idler pulley. Release tesion and slide belt off . Make sure you have the diagram for serpentine belt. it is usualy under the hood. If not make a diagram yorself before removing belt.

Aug 13, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

2000 chevy 2500 with 175,000 miles and the service engine light soon keeps coming on. Also there is a chirping sound when I accelerate. Just had the serpentine belt replaced and the issues stopped for a...


Readjust the Serpentine belt as the solution for the chirping sound. The check engine light could be a lot of things. Take it to the local Auto parts store and ask them to read the fault code for you. It is most likely the O2 sensor needing replaced and is an easy fix.

Jul 18, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

How difficult is is to change the water pump on a 2000 Chevy Silverado and are there special tools needed?


Hi, my name is Ben. I wouldn't call this a difficult repair, but it is time consuming. You may need a special tool to help you remove the water pump pulley.
Remove the air intake duct, remove the upper radiator shroud,remove the fan assembly, loosen the bolts on the water pump pulley a few turns before removing the serpentine belt, then remove the serpentine belt, now remove the water pump pulley, if it's a V-8 remove the lower radiator hose and thermostat housing,unbolt the water pump, if it's tight lightly tap it with a RUBBER mallet. Important, clean the gasket surfaces very well. apply a thin coat of RTV on both gasket surfaces and install a new gasket. On V-6 engines use a small amount of the RTV on the bolt threads. The rest in the reverse of removal. Once completed, refill with coolant and check for leaks, bring the engine to notmal operating temperature and turn the heat on high

Apr 06, 2010 | 2000 Chevrolet Silverado 1500

2 Answers

2000 Ford Focus serpentine belt replacement


How To Install Replace Engine Serpentine Belt Ford Focus Zetec DOHC 1AAuto.com


Jan 19, 2010 | 2000 Ford Focus

1 Answer

How do you change the serpentine belt on a 1995 f-250 Diesel


e-mail me at berrydalewolf@yahoo.com and i will scan you a copy to put up. berrydalewolf

Oct 27, 2009 | 1995 Ford F250

1 Answer

How do I change the alternator in a 2000 chevy silverado. It does not appear to be a serpentine belt, and the only answer I have is to take the pulley off of the alternator.


there is a belt tensioner it will use a 3/8 drive ratchet there is an index 1n the tensioner for it this will allow you to release the belt, remove the 14mm bolts and the alternator will be free

Oct 02, 2009 | 2000 Chevrolet Silverado

1 Answer

How do change serpintine belt ford 2003 f 250 6.0


changing a serpentine beltUsually, A serpentine belt system has a spring-loaded idler. Using the proper wrench, usually an 18mm, one can relieve the tension on the belt, making it relatively easy to change the belt. On most vehicles you will find a sticker either on the underside of the hood or somewhere in the engine compartment that shows how the belt goes on.

Sep 25, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Serpentine belt keeps shredding on the inside


PULLEY ALIGNMENT.WITH BELT ON LOOK AT THE PULLEYS FROM THE SIDE.U MUST HAVE A PULLEY THE IS MISSALIGNED

May 06, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

Serpentine belt replacement 1994 chevt silverado 5.7 lt


call your local autozone and the will tell you over the phone or fax you a copy

Feb 14, 2009 | 1990 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

1,729 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...