Question about 2004 Hyundai Tiburon

1 Answer

Changing the headlights

How to replace theheadlights bulbe( low beam) light bulbe in mazda3 20004

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

This picture shows the rear side of the headlamp assembly. I've circled the access caps to the high & low beam bulbs (they just twist off (counter-clockwise) to access the bulbs. Depending on which engine is in your Tiburon, access is easier if you remove three 10mm mounting bolts to the headlamp assemblies and remove the entire headlamp assemblies (see illustration)
Changing the headlights - c173c7f.jpg You'll want to disconnect these two connectors .. then remember to reconnect them when you put the assemblies back on.

Hope this helps

Posted on May 31, 2009

  • Paul McGrath
    Paul McGrath May 31, 2009


    BACK SIDE OF HEADLAMP ASSY.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sled lost spark. the headlight doesn't light when I pull it over. its completely dead


Dealing With Headlights and Directional Signals ' Military.com

www.military.com/.../dealing-with-headlights-and-direction...

Military.comMost turn over within 1.5 sec. ... If you experience problems with other lights, it's usually just a matter of changing ... If a headlight doesn't work on Low beam but does work on High, you have to replace the whole sealed-beam unit or headlamp. ... Pull out the bulb assembly, remove the old bulb, and install the replacement.

Mechanical Violations - FindLaw


Nov 26, 2015 | Cars & Trucks

2 Answers

What would cause the low beam headlight not to work when all other lights work?


If you have standard halogen bulbs:

  1. Burned out light bulb; or
  2. Fried wires between the dashboard wiring harness and the headlight bulb connectors; or
  3. Fried headlight bulb connectors.
If you have HEI emitters:
  • Failed ballast.

May 11, 2015 | 2002 Mercury Grand Marquis

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

Lights will not turn on


HEADLIGHTS NOT WORKING


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----


All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

Working of Headlight switch?
------------
Both headlight bulbs blow together?

------------
Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Nov 28, 2012 | 1986 GMC K1500

1 Answer

I have a 2005 chev impala can i replace my high beams headlights with just low beam lights


NO YOU HAVE TO REPLACE HIGH BEAM LIGHT BULBS WITH HIGH BEAM LIGHT BULBS BECAUSE HIGH BEAM LIGHT BULBS AND LOW BEAM LIGHT BULBS TWO DIFFERENT TYPES OF BULBS.WEAR CLEAN LATEX GLOVES HANDLING THE HEADLIGHT BULBS WHICH IS HALOGEN LIGHT BULBS, OIL FROM FINGERS OR HAND WILL CAUSE HALOGEN BULBS TO OVER HEAT BLOW OUT.

Jul 05, 2011 | 2005 Chevrolet Impala

1 Answer

How do i change headlamp bulbs


Changing the headlight bulb is a little bitdifficult for those not familiar with the vehicle. Both the high and low beamsare encased in a sealed unit, which also contains the turn signal, parkinglights, and side reflector. To change a single headlight, the entire headlightcompartment must be removed from the car. Once you understand how to remove thesealed headlight unit from the car, replacing the bulb is relatively simple.Follow the steps below on how to change the headlamp bulb in this car. Removal 1. Open the hood of the Jeep and locate thelong, headlamp jackscrew. The screw is located almost directly above theheadlight unit and can be removed using a 7-mm socket wrench. This will allowyou to remove the bezel from the grill opening panel. Remove the three screwsattached to the retaining ring to the headlight console. The screws are locatedon the bottom front and side of the unit. In some models the screws have beenreplaced with ball-stud alignment posts, enabling you to remove the headlightunit by simply wiggling it loose. 3. Disconnect the headlamp bulb wireharness connector located at the front of the headlight unit. This is locateddirectly above and between the parking and turning bulbs. 4. Separate the sealed headlight unit fromthe vehicle; disconnect and replace the old bulb. The high beam is locatedtoward the center of the car. The low beam is the bulb on the outermost edge ofthe unit. This is how to Install 1. Reconnect the headlamp bulb's wireharness-connector. Then Replace the headlight unit in the headlight canister. Positionthe retaining ring back in its original position and install the three screwsagain. If you wiggled the unit out, ensure that it is replaced firmly. 2. Install the headlamp bezel by replacingthe 7-mm jackscrew on the inside of the hood. Make sure all connections aretight before starting the car and inspecting the replacement.

Jan 14, 2011 | 2000 Jeep Grand Cherokee

2 Answers

No headlights only high beams


Both the low beam bulbs must be defective.
People at Jiffylube change headlight bulbs while you wait, if you are not up to the task.

Dec 02, 2010 | 2002 Chevrolet Impala

1 Answer

Low beam not work !!


replace the headlight bulbs. Usually when the bulbs blow out the low beam blows out first, but the high beams still work. If you want and need both low and high beams to work then replace the headlight bulbs with brand new ones and I garauntee that both low and high beams will work

Mar 27, 2009 | 1999 Dodge Caravan

4 Answers

Headlight main beam not working


Strange headlamp problems on Saabs can often be attributed to a failing Headlamp relay. Here are a few common situations:
Issue1 - Headlamp switch will work backwards: Turn on the switch and theheadlights go off and turn off the switch and the headlights will goon.
Issue 2 - High beams will disappear. You will have nohighbeams. Be sure to check the headlight bulbs PRIOR to ordering therelay. Remember however that it is possible for both high beams burn out at the same time
Issue3 - High beams will not work only the low beams will.
Issue 4 - A single bulb setting (low or high) on either side will not work and bulb replacement will fix it.
You can sometimesfix these issues by removing the relay, taking off the cover andresoldering the connections on the relay bottom. To perform this repair, go to my illustrated tutorial at customsaab.com.
In some cases youwill have to replace the relay to effect a long term cure. The aftermarket replacement can be had at Eeuroparts.com for about $60.00:
Name: Bulb Check Relay
Part Code: 4109070A
Brand: sm_311e0dbd-c670-4bed-a50a-1ba3424ef87d.jpg
Description: Bulb check relay for any 9000 92-98, 900 94-98, 9-3 99-03, 9-5 all.

KAE (Kaehler) made in Germany.
Price: $59.90


Nov 19, 2008 | 1999 Saab 9-5

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...