Question about 2003 Nissan Maxima

1 Answer

My car stall's out at over 200RPM, Nissan Maxima what could it be

It was cold and wet with lots of snow.

Posted by on

  • cyrkel Dec 21, 2008

    2003 nissan maxima

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

Dear cyrkel in order to help you we neded the year and model of your nissan ...nicolas

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 nissan maxima stalls


known problem is the connection at the injectors check for green where the wires are connected to the injectors or check the air filter maybe dirty listen for a vacuum leak this car has lots of known problems

Jan 12, 2013 | 1992 Nissan Maxima

1 Answer

1995 nissan maxima that is running rough and occassionally stalls out. We have replaced the spark plugs and wires and run fuel injector cleaner through it. Cant afford a lot so trying to run through...


check your MAF sensor first..thats what it was on my 4th generation Maxima after tearing down the whole tbi system and what not....just pull out the sensor itself and clean it up, see if thats it, if not....idle control valve probably. or wiring.

Jul 23, 2011 | 1995 Nissan Maxima

1 Answer

Hi, have a 1995 nissan maxima automatic, 160K miles, after starting and driving about 10 minutes the car stalls while driving, and will not start for 10-20 minutes, then starts, and does same thing again...


it could be an egnition module or somthing basic like fuel presure .. prob the pump .. but lots of things can make it do that .. u need a mechanic to look at it

Apr 11, 2011 | 1995 Nissan Maxima

1 Answer

My wife's car started stalling and would die at a stop light. Had the car in shop and was told the camshaft sensor was my problem. Had it replaced and the car got worse. Now I'm told I need a new...


Forget what things do.
Your vehicle has never been properly diagnosed.
You need to find a local repair shop that works on a lot of Nissans and is up to speed on current technology.
To start with a stalling issues and go to a cam sensor,trans,etc, tells me that you haven't found mechanics with the necessary skills to repair todays high tech vehicles.

Sep 19, 2010 | 2004 Nissan Maxima

1 Answer

Stalls when excellerating


i would do a few things here, simply spend $8 on some injector cleaner to break down carbon deposits, then try replacing the fuel filter, lastly, get the timing checked, plug gaps {new plugs} clean oxygen sensor in exhaust then lastly get the fuel pump pressure checked at a mechanics, all in that order untill it works, Good luck

Nov 20, 2009 | 1986 Nissan Maxima

1 Answer

Check Engine Light constantly on, car stalling out please help!


if you notice it when it is wet out then i would do a tune -up but if not i would check the fuel injectors because they are a very very common problem with these years of cars. i do them all the time.

please give me a repair history and i will try to help.

Oct 25, 2009 | 1995 Nissan Maxima

1 Answer

2000 maxima has erratic idle on cold days and will stall out on extremely cold days. Also, have noted antifreeze leak (on ground) on those really cold days. Car runs fine once it reaches normal operating...


It sounds like an engine temp sensor is open.. When your engine is cold or anti-freeze is cold your ECU or ECM gets a signal from the temp sensor for cold engine start. It would make sense that it works fine when hot because the resistance on the sensor is a lot lower. Take an ohm meter if you have one and check the resistance across the temp sensor pins. When the engine is cold the resisitance should be really high. Start and warm up your car to normal temp and check it again. It should be a lot lower now. If not replace it. Hope this helps.

Sep 24, 2009 | 2000 Nissan Maxima

1 Answer

2000 maxima gle stalling out????


I had a lot of problem stalling until I bought a new mass air flow sensor online $100 and took 10 minutes to install it.

Mar 17, 2009 | 2000 Nissan Maxima

14 Answers

My nissan maxima stalls


Every answer here is wrong. This has been driving people nuts for 15 years. The problem is the engine wiring harness which has a bend going past the right strut tower, Nissan had a service bulletin on this in September of 1999, Google it, it's in pdf.

Jul 15, 2008 | 1995 Nissan Maxima

Not finding what you are looking for?
2003 Nissan Maxima Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...