Question about Mitsubishi Galant

1 Answer

Lost drive in auto gearbox v6 24 valve engine model speedo not moving when you acelerate in drive suspect torque converter

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Does it move but the speedo doesnt work properly or at all? Unusual or no gear changes? Suspect the Vehicles Speed Sensor (VSS) on the gearbox.

If it doesnt move in any gear check the autobox fluid level, failing that get it checked for copdes, could be a few things

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I fix a Nissan liberty automatic not changing gears when it gets hot


Hi sad to say this gearbox requires valve body repairs ,replacement of dextron 3 ATF fluid and filter.clutches and friction plates should be checked replaced if worn.Torque converter should be checked out.If gearbox has electronic functions a diagnostic report should be done before stripping.A conventional auto gearbox pre 2000 model could be fitted with a external modulator switch causing present fault ,over powering the above mentioned faults.

Apr 05, 2015 | Nissan Cars & Trucks

1 Answer

Transmission on 2009 Nissan Versa Hatchback SL


dont go to mr transmission. I have had to go back 15 times then i finnaly sold the car because they recked it. sounds like a speedo sensor or the sterio installer cut the wrong wire

Mar 13, 2013 | 2009 Nissan Versa Hatchback

1 Answer

Code 0740 andd 0700


P0740 - Torque Converter Clutch Malfunctionxicon.jpghttp://engine-codes.com/p0740.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted When is the code detected?Diagnostic trouble code P0740 is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve.

P0700 TCM has requested PCM to run on Check engine light to alert to a fault in the automatic transmission.

Oct 02, 2012 | 2003 Volvo V70

1 Answer

I have a 96 mustang gt. Just dropped in a new mill. Transmission worked great before the last mill blew. Now, as soon as I start the car the converter locks up. Airing in park the car lurches forward and...


Sorry no idea here iam a europeon mechanic with limited experiance in auto boxes ,but on the back of the torque converter is two lugs that drive the front oil pump and i can only suspect that you didnt line these up ,when you change a auto box you mount the torque converter onto the gearbox first then put the whole assembly in not leave the converter on the engine and push the box up or you end up with a problem like this

Apr 15, 2012 | 1996 Ford Mustang

1 Answer

'95 Mercury Tracer automatic transmission; let go running down highway. when stopped, would not engage either in reverse or forward. fluid level ok. fluid appears ok, normal color, no burn. ...


sir .
it is a torque converter problem not a gearbox problem
it contains oil also if it lost no power transfer between engine and gearbox could be th oil sealing of your converter
have a good day

Jun 11, 2011 | 1995 Mercury Tracer

1 Answer

I have recently bought a mazda 929 luce limited nd its got a v6 engine 3.0l 18 valve ,,its been parked for over nd year ndd upon changing da transmission fluids today i have been successful in moving...


Hello and welcome to FixYa!

One thing that can cause this is a faulty torque converter. If the torque converter is faulty, the shifting of the vehicle fails. One good reason why it only shifts on 2 gears. Have it replaced and you'll be good.

Hope this helps and thank you for using FixYa! Have a good one!

May 04, 2011 | Mazda 929 Cars & Trucks

1 Answer

Torque settings for volvo 740 torque converter and flywheel


torque converter housing -- engine, (M10) 26-37 ft/lb (M12) 41-66 ft/lb
Drive plate -- torque converter 30-37 ft/lb
Torque converter housing -- gearbox housing (4 x M-10) 20-31 ft lb
(2 x M-12) 34-50

Apr 05, 2010 | 1989 Volvo 740

1 Answer

My 2001 magna automatic won't go into drive,reserve etc. I was driving along fine then the next thing it just rolled.engine was running but won't move in any gear.


The torque converter on the gearbox has gone, this is what converters the power from the engine to the gearbox, not cheap!!!

Jan 20, 2010 | 1999 Mitsubishi Diamante

2 Answers

Engine runs but if you put in Drive 1,2 and reverse it doesn't work


the torque converter in u gearbox has gone best to lok for a replacement gearbox

Oct 07, 2009 | 2003 Ford Windstar

1 Answer

Gearbox auto 4wheel drive


Obtain a fault code from the obd plug, go from there. If there are no strange noises then control unit is faulty. Stupid thing- is the fluid level ok?

May 18, 2008 | 1997 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...