Question about 1991 Toyota Pickup

1 Answer

93 toyota pickup clutch problem

I started my truck at 13 degrees and tried to apply clutch. worked for a min and then to the floor. nothing. comes back up but no pressure. my guess is fluid was thick and blew some kind of gasket. Im very low on money so I cant wast on wrong parts, any advice on what to check first?thanx..... Not the fun part of living in alaska

Posted by on

  • waynesize Jan 16, 2009

    93 toyota 4 cyl p.u. lost clutch; petal still high but won't engage
    is clutch shot or slave cyl

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 129 Answers

I would think it is the slave cylinder being underneath the car try flushing cucth resivor out with new fulid and bleed if it still no pedall buy a slave cylinder kit they are cheap fit and bleed again u may have to bleed it a few times



u must have had moisture in your fulid
try that mate

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 93 toyota pickup and its getting gas, its firing, turning over but wont crank. i was thinking it would be a fuse but i have checked them all. dk what to do..


! have a 93 Toyota pickup that I started and while it was warming up ,during sub zero weather, it stopped running. Now when I try to start it, it will turn over but will not start. It is getting gas but doesn't seem to be firing.

Jan 31, 2013 | 1993 Toyota Pickup

1 Answer

Need to replace the clutch in a 1994 4cyl pickup truck


a '93 manual here ... as 94 was the last year for the pickup shouldn't be any changes:
http://www.ncttora.com/fsm/1993/clutch.html

Mar 01, 2011 | 1994 Toyota Pickup

1 Answer

1994 toyota pickup clutch slips


If you have proper pedal free play (the clutch is releasing and engaging properly but slips when you apply throttle) then it's time for a new clutch. Worn out or has oil on it.

Oct 27, 2010 | 1994 Toyota Pickup

1 Answer

I just replaced the clutch andn slave cylinder after i bled it i went to apply the clutch and it takes all the muscle ive got to get it to go to the floor. did i install the clutch or bearing wrong or is...


it is possible that the bearing has jammed or dislodged when u fitted box,which has depressed the clutch-try looking through starter motor hole im a mech of 30 yrs and its happend to me on a few ocasions-i feel for u as the box will have to come back out

Aug 10, 2010 | 1987 Toyota Pickup

2 Answers

Clutch pedal stick to floor on ocassion and on start up there is a noise coming from the clutch area


check your sleeve cylinder on gear box it much be leaking,and i think you clutch is gone.sounds like your thrush bearing is also gone.

Oct 10, 2009 | 1993 Toyota Pickup

1 Answer

My 4x4 toyota pick-up was stored for two years without running now my clutch stuck at the end i start my engine when it is engaged in first gear and it run ,i try to push on the clutch or change gear a...


Clutch system works exactly like hydraulic brake system. Check everything for leaks, make sure slave has not rusted and frozen in place and check that master cylinder is not bypassing internally. It's a good idea to bleed it out as well...fluid is hygroscopic and likely has drawn in water from the air over time (not good for system) That applies to brakes as well.

Jul 14, 2009 | 1991 Toyota Pickup

1 Answer

I own a toyota 4x4 pick-up 1989 it was stored outside without running for 2 years ,now my pedal clutch stay stick.How can i fix it? Also how can i put oil in the gearbox(transmission)?


I assume the clutch won't release. Put the trans in neutral and start the engine. Let it get warm. MAKE SURE THERE IS ROOM TO DRIVE THE TRUCK, WITH NOTHING IN THE WAY. Stop the engine, put the trans in first, and start the engine. The truck will jump forward when the engine starts. Get it on a clear road, push the clutch pedal in, and hit the gas. It should come loose in one or two tries.

Jul 14, 2009 | 1991 Toyota Pickup

1 Answer

Toyota Pickup 1991 4cyl 22re - Trouble starting sometimes


Sounds like the switch on the clutch pedal needs adjusted. Is the floor mat bunched up under the pedal, I've seen that. It could also be dirty ground connections. There are several. Not only the battery ground but smaller ones also. A bad ground can mean low voltage to the ECM and injectors. Does the start solenoid click. If it does may be bad battery connections on either end. If it doesn't may be bad connections in the small wires to the solenoid. The alternator could be consuming the available connections when the battery is recharged from starting then the ECM and injectors can have enough. Why it would run rough for a while. The first place to look is always the electrical connections. A lot of people have paid for new starters because of bad connections. I had a friend kept buying alternators from his trusted mechanic because somebody had removed the ground wires from his engine to the chassis. (This was before he asked me to look at it. Of course!)

Jun 06, 2009 | 1991 Toyota Pickup

1 Answer

93 Toyota Paseo 1.5 lit, 5 speed will not start when hot


The starter won't get hot while the car is running. The starter only works while you are cranking it over. After running a while and the car is hot, feel if your battery is not over heating. If the vaultage regulator in the alternator is bad the battery may be overcharging causing it to over heat and not want to work when boiling. After it cools down it may work again.
I this will help.
Sam

May 15, 2009 | 1993 Toyota Paseo

1 Answer

91' Toyota Pickup clutch not depressing/stuck.


dude under truck left hand sideof tranny, is your clutch slave cylinder, remove the hydraulic line, the two mount bolts. replace the slave cylndr. you got clutch !!!!

ps i dont recall there being a bleed valve. it should bleed by gravity


james ray

Apr 13, 2009 | 2004 Toyota Highlander

Not finding what you are looking for?
1991 Toyota Pickup Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...