Question about 2005 Pontiac Grand Am

2 Answers

I need to find a diagram or a picture showing how to install the thermostat on this car it has really been giving a lot of grief.

Posted by on

  • 1 more comment 
  • T_williamson Dec 21, 2008

    2001 Pontiac Grand Am 4 Dr Auto V6 I have the same problem..

  • Anonymous Jan 24, 2009

    changing the thermastat on 1995 pontiac grand am

  • Anonymous Jan 29, 2009

    i need to change my thermostat need to know how



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Were the thermostat on a 2005 pontica grand am 2.2 at

Posted on Jan 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 247 Answers

What year is the car? and if you have a email address i might be able to send the information you want as long as i have the repair maunal for your vehicle.

Posted on Dec 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a diagram that shows me exactly where the thermostat in a 2002 dodge intrepid with a 2.7 engine is/ in otherwords show me what it looks like in the car

on most vehicles you follow the TOP radiator hose to locate the thermostat ,, But on the 2.7 is at the motor at the Lower hose, I'll try and find you a picture or diagram , here is a step by step link that tells you how to replace it,

Sep 24, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

Need diagram for installing syinoyed in n2002 chevy silverodo in transmion overdrive sylinoyed and 3 to 4th sylanoyed the truck is 1500 hd

You keep asking for a diagram and I dont think that is what you need.If you have a no overdrive condtion sometimes then you likely do not have a bad solenoid.If one of the shift solenoids was bad you would be missing 2 gears such as 1st and 3rd or 2nd and fourth.If you can give me a little more info I can most likely save you time,money and grief.Only trying to help.

Mar 28, 2011 | Chevrolet Silverado 1500HD Cars & Trucks

3 Answers

Location of thermostat

Ford Tempo/Topaz 1984-1994 Repair Guide


Fig. 1: Engine thermostat-2.0L engine


Fig. 2: Engine thermostat-2.3L engine


Fig. 3: Engine thermostat-3.0L engine


Fig. 4:
Remove the harness from the housing


Fig. 5: With the retaining bolts removed, take the thermostat and housing out of the engine compartment, and place on a clean surface


Fig. 6: Remove the thermostat from the housing. Remember the direction in which it was installed

I really hope helps with this (remember rated this help) Good luck.

Jan 07, 2010 | 1991 Mercury Topaz 4 Door

2 Answers

What way does the thermostat go into a 1999 for ranger 3.0

. If you are needing to replace your thermostat, I highly recommend doing it yourself. It is easy to do, and very cheap.
Now to start. It should take about an hour to complete this, but giving yourself plenty of time is the first step. The tools I used are very common, and can be found just about anywhere. i have the diagram below all of this post

Before you start, drain all of your coolant out of the car. This will make your life a lot easier down the road.

Tools used:
3/8" Drive ratchet
3/8" 2" drive extender
3/8" to 1/4" drive reducer
1/4" drive ratchet
10mm socket
8mm socket
Flathead screwdriver (not pictured)

Parts needed: Thermostat
New coolant

look at the picture and you will see the proper way it needs to be installed ok?
I hope that this is very helpful for you
Best regards michael


Nov 12, 2009 | 1999 Ford Ranger SuperCab

2 Answers

Need diagram for instaalling serpentine belt on 1989 chevy s10 2.5 engine belt broke and no diagram

Picture is for the carbureted model but has the same patter as my fuel injected model. It's actually pretty easy to see how it goes. If the pully has groves then the grove side of the belt will fit right in it prefectly. If it's smooth then the back side of the belt with run along it. To loosen the belt tensioner do two things. first in the picture below you will see in the top middle you will see the tensioner. The back of the belt runs along it. You will notice that it looks like a solid peice. loosen the top slighty with i believe a 15mm. After that connect to the pully attached to it and pull back to the passenger side until you can slid the belt off the alternator. put back on in reverse order. really really simple once you do it. good luck

Oct 11, 2009 | 1989 Chevrolet S-10 Blazer

2 Answers

Ford 2002 taurus

Sometimes the parts store will help you with their computer pictures.Aslo the dealer will gladly print one for you,go to the parts department,smile and ask for one.

Aug 01, 2009 | 2002 Ford Taurus

1 Answer

Need picture diagram of a 1999 mazda 626 thermostat housing v6 2.5

where is the thermostat on the 1999 mazda 626 i need a diagram... the book shows me a different motor....

Jul 13, 2009 | 1999 Mazda 626

1 Answer

I'm just looking for a rear end housing component diagram for a 2002 Dodge Dakota. Any kind of diagram to show a step by step assembly and where components go. Thanx,,,JDUBB

Differentials are not just "bolt together" items...setting up a gear set requires special tools and lots of experience, or the end result will be a self-destruct. No one can guide you through this and diagrams will give you locations but not the "feel" for the job (as far as I'm concerned, doing this job correctly is part science and part "art-form") You will serve yourself well by having an expert do this for you or by buying a complete unit from a scrapyard. Sorry if my answer disappoints you, but I am saving you a lot of grief in advance.

Jun 08, 2009 | 2002 Dodge Dakota Club Cab

1 Answer

Need a picture of cooling sys showing thermostat on a 1992 legacy

i cant give you a diagram but can tell you how to locate it easy just locate your radiator and follow the top big black radiator hose from the radiator to where it goes on the motor it hooks onto something metal there with 2 bolts unbolt that and there will be your thermostat...let me know any questions you might have..


Jan 05, 2009 | 1992 Subaru Legacy

1 Answer

1999 Buick Century thermostat question.

patience , and a 13 MM wrench , you gotta get your arms in there deep , that lower bolt does not need to come all the way off , the thermostat housing has a slot at the bottom for easier access , loosen it about 3.4 of the way and you can get the housing out , experience says a premium thermostat will give you grief trying to reinstall , get a regular duty thermostat .reverse procedure.

Jan 02, 2009 | 1998 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

83779 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides