4x4 grinding 1986 F150 manual transmission. When you lock it in and put it in 4x4 high It engages but makes a grinding sound when you drive. What are some likely causes.

4x4 not working on 2005 F-150 - Page 2 - F150online Forums

www.f150online.com/.../265352-4x4-not-working-2005-f-150-a-2.html

Dec 20, 2008 - 4x4 not working on 2005 F-150 ... I cut this out of the 2005 shop manual for Four Wheel Drive - Electronic ... 1998 Ford F-150 4.6L Long Box! Help 4 wheel drive not working -lights work- vacume to wheels ...
Jan 15, 2013
4wheel drive, front end not engaging (?)
Jan 4, 2011
4-wheel drive not engaging
Sep 16, 2010
please help, f150 stuck in 4 wheel drive
Mar 8, 2009
More results from www.f150online.com

Ford F150 4X4 Diagnosis No Tools Required - YouTube

? 6:03
https://www.youtube.com/watch?v=m6b7FQOsbvI
Feb 2, 2014 - Uploaded by FordTechMakuloco
I have a 2005 F150 FX4 and the hubs seem to lock intermittently.... of the tire, but the driver side CV shaft remains engaged with the tire even when ... What happens when can not get INTO 4wdLights come on here the clunk have .... 1994-2015 Ford F150 5.4L & 4.6L VCT Solenoid Replacement - Duration: ...

4x4 not working - Ford F150 Forum - FordF150.net

On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?

http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Regarding 4 Wheel Drive problems,
Always follow Owners Manual for when and how to utilize 4 Wheel Drive. In most cases it should not be activated when vehicle is moving. Automatic Transmissions with 4 Wheel Drive have a Transfer Case similar to that used with Manual Transmissions. Shifting between LOW 4WD and HIGH 4WD should be selected while the vehicle is stopped. Again, follow Owners Manual Instructions. If you hear strange Grinding Noises have a Certified Technician check out your vehicle immediately.

Sorry that you are having troubles but, it sounds like the problem is more than a simple fix to me. If your Vehicle has Manual Locking Hubs make sure they are in the correct position for use in 4WD.

This depends on what system you have installed in your truck. If you have push button 4x4 with auto locking hubs then you would put your vehicle in neutral and press the 4x4 button. You then drive froward about 10 feet and the auto locking hubs should then be engaged.

If you do not have push button control and you have a gear shifter which controls the transfer case you would push the level in 4x4 hi or low depending on what you want (while in neutral) then drive forward about ten feet so the hubs lock. If you have manual locking hubs you need to manually engage the hubs before you put it in 4x4 mode,

4 wheel drive trucks make this sound alot im guessing its a manual shift so i would saw that the meshing is more of a grinding instead so i would have the transmission rebuilt to fix the problem or just see if the rings inside the trans. is missing the tooths on it :)

Is it meant to switch from 2 to 4 wheel drive when its moving? if it is then I'd make sure the transmission oil is of good quality and upto the proper level. not a solution just you should do this before suspecting anything else.

sounds like eithor the hubs arent locked or not engaging are the axcell shafts spining and if yes witch one

if just 1 insert pry barr and then try and nove truck if it moves rebuild outer end or engage the lock
if no locking hub may be it's time to invers in some

You say 'new' truck, 09? or new used? I have had 3 Fords, 3 w/ manual trans. case, if you go into 4x4 Low range, you must come to a complete stop before shifting the trans. case to 4x4 mode, and I always put trans (automatic) in neutral before slipping into 4x4, it engages smoothly, no grinding. 4x4 high range can be put in while moving, but I would let off the gas pedal, shift to 4x4 high range, then resume accelerating. If there is any grinding going on doing it as above, something isn't right. Check the trans. case fluid level also, to make sure that's not an issue.

Ford has 2 types of 4x4 system engagement. One is a knob on the dash that you just turn to 4wheel drive high or low. The other system is the 4x4 transfer case shift on the transmission tunnel (hump) between the driver and passenger seats. To shift into 4 wheel drive high while driving, just let off the gas and shift transfer case into 4H position, and continue driving. To shift into 4 wheel drive Low, stop the vehicle completely, put transmission in neutral, shift transfer case into 4Low position, put trans. in gear, and start driving. I am assuming before doing the above, you have locked in ( turned the front hubs to 4 wheel drive position.) Any further questions, let me know.

sounds like the output shaft is broke train is still turning in the case just not making it past the transferr case for the 4 wheel drive .so well turn and the tranny is not stoppping and you put it into park and its like you still going down the road and trying to throw it into park and the pin can not lock into the shaft cause its still turn at a high speed