Question about 2001 Chrysler Town & Country

1 Answer

I need to know the process on how to program the cars built in gurage door opener on a 2001 chrysler town & country

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 731 Answers

Hi my name is Allen!

Program a previously trained homelink button as follows... 1. Press and hold the desired pre-programmed HomeLink button for at least 20 seconds (but no longer than 30 seconds) until the indicator light begins to flash. Without releasing the HomeLink button, position the hand-held transmitter 1-3 inches away from the homeLink surface keeping the HomeLink indicator light in view. 2. Using both hands, simultaneously press and hold both the desired HomeLink button and hand held transmitter button (or press and "cycle" - as described in "Gate and Canadian programming"). DO NOT release until the HomeLink indicator light flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapid flashing indicates successful programming) The previous device has now been erased and the new device can be activated by pushing the HomeLink button that has just been programmed. however, it may be necessary to follow steps 5-7 of the "programming" section to complete the rolling code training. This procedure will not affect any other programmed HomeLink buttons.

Posted on Jan 17, 2009

1 Suggested Answer

swolfinor
  • 504 Answers

SOURCE: program gurage door opener

GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Posted on Jun 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The back door latch does not open the door or unlock it 2001 Chr


Replace the latch mechanism. There is a short in the latch. It happened on both of my vans. The latch costs about 90-100 dollars, if memory serves... 3 bolts, a wire connection, and the manual latch bar. Very easy, shouldn't take more than 5 minutes to switch out.

Jan 24, 2010 | 2001 Chrysler Town & Country

1 Answer

I lose power to the door locks on my 2001 chrysler


more than likely this is caused by a bad ground wire located within the door locks wiring harness

Jan 16, 2010 | 2001 Chrysler Town & Country

1 Answer

2001 Chrysler town and Country tire size


the sticker on the drivers door or door jamb will have that info. plus it is on the side of the tire, starting with P___-__-__

Sep 23, 2009 | 2001 Chrysler Town & Country

2 Answers

How do i program the garage door transmitter that's found on the 2001 chrysler town and country


If you have a hand book that comes with the van the instructions are in there. on the top panel you have one two or three dots on a switch you have to hold the garage opener next to the switch in the van press both together until it flashes .

Apr 23, 2009 | 2001 Chrysler Town & Country

1 Answer

Garage door opener


Sorry, the process is simple but too lengthy to post here.

Goto homelink.com

They make the system and have very complete instructions you can download.

PLEASE NOTE: MOST but not ALL Brands / models of opener will work with this system.

Mar 31, 2009 | 2000 Chrysler Town & Country

1 Answer

Open gurage door with the built in remote in the car


To Reprogram A Single Button

1. Press & hold the desired universal transceiver button. Do not release the button until Step 4 has been completed.
2. When the dot(s) under the HomeLink icon being to flash slowly (after 20 seconds), position the hand-held transmitter 1-3" away from the universal transceiver surface.
3. Press & hold the hand held transmitter button.
4. The universal transceiver light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.

The previous programming for the button has now been erased and a new device has been programmed to the button.

Repeat for any other buttons you want to do for other devices.

Dec 20, 2008 | 2001 Chrysler Town & Country

1 Answer

Program gurage door opener


GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Dec 20, 2008 | 2001 Chrysler Town & Country

2 Answers

2001 Chrysler Town & Country Sliding Door Harness


you need to remove the old harness and open it up then repair the broken wires this will save the old harness and what the other people are talking about

Nov 12, 2008 | 2006 Chrysler Town & Country

1 Answer

Sliding door


Saw this in an article:
2001 CHRYSLER TOWN AND COUNTRY - Campaign #01I003000 Summary: LATCHES/LOCKS/LINKAGES:DOORS:LATCH
Defect:
THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 2001 PLYMOUTH VOYAGER, CHRYSLER TOWN & COUNTRY, AND DODGE CARAVAN/GRAND CARAVAN MINI VANS THAT ARE NOT EQUIPPED WITH THE REMOTE KEYLESS ENTRY OPTION. THE SLIDING DOOR LATCHES ON THESE VEHICLES COULD RELEASE DURING CERTAIN SEVERE ACCIDENT CONDITIONS THAT INVOLVE THE SLIDING DOOR.
Consequence:
THIS COULD ALLOW THE SLIDING DOOR TO PARTIALLY OPEN.
Corrective action:
DEALER WILL REPLACE BOTH SLIDING DOOR KEY CYLINDER-TO-BELL CRANK LINKS ON THE SLIDING DOORS FREE OF CHARGE (PARTS AND LABOR). DAIMLER-CHRYSLER HAS DECIDED TO CONDUCT A SERVICE CAMPAIGN TO REPLACE THE SLIDING DOOR KEY CYLINDER-TO-BELL CRANK LINKS. OWNERS CAN CONTACT DAIMLER-CHRYSLER AT 1-800-853-1403, CONCERNING THIS PROGRAM.
Try calling that number and see if they'll do a replacement for ya..
1-800-853-1403

Jun 23, 2008 | 1994 Chrysler Town & Country

3 Answers

2001 Chrysler Town & Country mini-van stalling at all speeds


2001 Chrysler Town and Country- Won't start. Turn over. It acts like the fuel is not getting to the engine. After many attempts , it starts and runs like there are no problems. The car has 120,000 and has never had a problem. Is the fule pump bad?

Jun 21, 2008 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...