Question about 2002 Pontiac Sunfire

2 Answers

2000 Sunfire cruise control not working?fuse and cable good??

My cruise does not work at any speed???

Posted by on

  • 1 more comment 
  • saintjohnhom Dec 21, 2008

    Fuses are okay!

  • Anonymous Jan 22, 2009

    Hi tehre mine doesnt work either i drive a 02 sunfire

  • hhccmd May 11, 2010

    have you checked the fuses?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

There was a factory recall for the cruise control back in 2003, I would look into that first.

Posted on Jan 30, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Bigwrench1843@aol.com says to check brakelights to see if they work and let me know. lets talk!

Posted on Jan 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 ford windstar has a bad stumble when idling like it's missing accelerates fine when reaches cursing speed acks like it's missing also my cruise control stoped working


If your Windstar has the 3.8 liter engine, you are due for head gasket replacement. Just had mine done. The cruise control failure could be due to an open fuse or speed sensor failure.

Jan 10, 2017 | 2000 Ford Windstar

Tip

TROUBLESHOOTING WHY YOUR CRUISE CONTROL DOESN'T WORK


There are many things that can cause your cruise control to act up or not work at all. This article will lead you in the correct direction on finding a solution to your problem. This article is for any type of vehicle.<br /> <br /> <b>If your cruise control won't hold proper speed, </b>you need to look at the following parts. <br /> <ol> <li>Faulty Cruise Control</li> <li>Faulty Speed Sensor</li> <li>Faulty Vacuum or Vent Valve</li> <li>Faulty Stepper Motor</li> <li>Faulty Transducer</li> <li>Incorrect Cable Adjustment</li> <li>A Binding Throttle Linkage</li> <li>Leaking Vacuum Tank</li> <li>Leaking Vacuum servo diagram</li></ol> <b>If your cruise control surges, </b>check the following parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Faulty Speed Sensor</li> <li>Binding Throttle Linkage</li> <li>Kinked Speedometer Cable</li></ol> <b>If your cruise control cuts out on you, </b>check the following parts.<br /> <ol> <li>Faulty Transducer</li> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Brake or Clutch Switch Adjusted too tight</li></ol> <b>If your cruise control doesn't work at all, </b>check these parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Faulty Clutch or Brake Switch</li> <li>Leaking Vacuum Circuit</li> <li>Faulty Stepper Motor</li> <li>Faulty Speed Sensor</li> <li>Faulty Transducer</li> <li>Faulty Cruise Control Switch</li> <li>A Blown Fuse</li></ol>

on Jul 20, 2011 | Ford F-150 Cars & Trucks

1 Answer

How do I troubleshoot the cruise control of a 2003 Alero?


It's probably a problem with cruise control module , located under the hood in engine compartment . Or a bad connection somewhere . Do you know how to do electrical testing ? Is the air bag light lit on the instrument cluster ?

Could have DTC'S - diagnostic trouble code's stored .
DTC P1554
The powertrain control module (PCM) inhibits cruise control operation when certain conditions are not appropriate for cruise control operation. The PCM removes the ground from the cruise control inhibit signal circuit in order to disengage cruise control operation.
DTC P1585
Output driver modules (ODMs) are used by the powertrain control module (PCM) in order to turn on many of the current driven devices that are needed to control various engine and transaxle functions. DTC P1558 set indicates that an improper voltage level has been detected on the signal circuit which controls the cruise control inhibit circuit.
Action Taken When the DTC Sets
• The PCM will not illuminate the malfunction indicator lamp (MIL).
• The PCM will store the conditions present when the DTC set as Failure Records data only.

Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions. However, steep grades may cause variations in the selected speeds. The electronic cruise control system has the capability to CRUISE, COAST, RESUME SPEED, ACCELERATE, and TAP-UP or TAP-DOWN.
The main parts of the cruise control system are:
• The cruise control module assembly
• The function control switches
• The cruise control release switch
• The clutch pedal position switch (CPP), if equipped
• The stop lamp switch assembly
• The vehicle speed sensor
The cruise control system uses the cruise control module assembly to maintain the desired vehicle cruise speed and operation. The cruise control module assembly has an electronic controller and an electric stepper motor to vary the throttle in each different cruise control mode. The electric controller monitors vehicle speed and operates the electric stepper motor. The stepper motor operates in response to the electronic controller, to maintain the desired cruise speed. The electric stepper motor moves a strap that is attached to the cruise control cable which moves the throttle linkage. The cruise control module assembly contains a low speed limit which will prevent system engagement below a minimum speed of 40 km/h (25 mph). The module assembly is not serviceable.

Dec 11, 2016 | 2003 Oldsmobile Alero

1 Answer

2005 Impala cruise won't hold speed. The cruise seems to work kind of.


Check the linkage at the advance to se if it is broken. Some are by mechanical connection and others are by vacuum. If vacuum you have developed a leak and must replace the controler to make it work again.

Mar 09, 2016 | 2005 Chevrolet Impala

1 Answer

Cruise control not working


cruise controls are dependent on the following sensors all working together
brake sensor
clutch sensor
auto--vehicle speed sensor
rpm's sensor
fuse for the cruise control
cruise control switch either or all not working will stop the cruise control from engaging
road speed at which you can engage the cruise control has to be above a reset speed before it will cut in and work

Sep 05, 2015 | 2009 Chevrolet Chevrolet Equinox LS

1 Answer

I have a vs ute hsv v8 auto The digital speedometer and speed alert and cruise control are not working there is power to speed alert and cruise control but cruise doesn't engage or hold at all.


run the fault codes and look for a faulty VSS sensor as it works the speedo and gives information to the cruise control as to road speed to keep the vehivlr at the set speed

Aug 17, 2015 | Cars & Trucks

4 Answers

2005 Chevy trailblazer ext problems 1. Cruise will not set.worked last on 4/12/15 2. While checking fuses for CC problemdome lights stopped working, but worked fine before checking fuses. PLEASE HELP!


Bummer deal! This may be a way to tell you some tail lights are burnt out. Some cruise controls have a fuse in a second location.
The fuse is not in right or is blown. Check with a new fuse. Hope this helps. ...gc http://www.auto-tune-up-and-repair-options.com/

Apr 20, 2015 | 2005 Chevrolet Trailblazer Ext

2 Answers

How do I set cruise control on 2001 buick lesabre limited. just bought car have no manual. cant get it to set.


If you push on and set and nothing happens, the system may not be working properly.
You can get an owners manual on Ebay.

Mar 22, 2015 | 2001 Buick LeSabre Limited

1 Answer

Cruise control doesn't stay on in my 2004 Chevrolet Cavalier?


not being informed if it is auto or manual, here are some of the items that control the cruise control
brake pedal sensor ,
clutch pedal sensor,
vehicle speed sensor
engine ignition control module , tacho ,
vehicle speed --will disconnect if the road speed is below setting minimum speed
ratio changing
bad cruise control switch
wiring and connections
ecm problems
problem cruise control module

Apr 06, 2017 | Cars & Trucks

Not finding what you are looking for?
2002 Pontiac Sunfire Logo

757 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

82149 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...