Question about 2005 Chevrolet Suburban

1 Answer

I have a 2005 Suburban Z71. I replaced brake pads on all four wheels. However I get a mean scraping sound from the rear brakes. A friend mentioned that he thought that the e-brake was a separate brake ant that might be screeching. Does that sound legit? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Well when u replaced pads did rotors needed to b turned??& r back disks brakes???if not then u can adjust it if it's not rotor take wheel off & cover where pads r & adjusted make sure when u get cover on it's tight but not tight...

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whining sound coming from rear of vehicle when I step on the brakes


if its only when you step on the brakes you may need brakes or you have a wheel seal leaking but probably low brakes. if you have disc brakes on the rear there is a sqeeler on the pad that scrapes the rotor when your brake pads are low.

Sep 26, 2013 | 2003 Ford Explorer

1 Answer

My rear brake pads and rotors have worn out in 1 year and the front brake pads are the original and don't look worn at all. My sub has 150K miles


Its possible. There is an equalizer valve that balances pressure to the 4 wheels.
Two other possible causes are a problem with the parking brake, or the front rotors and pads are glazed and not providing any friction.

Jul 08, 2012 | 2005 Chevrolet Suburban

2 Answers

When i hit the brakes i hear a lot of noise and the passenger side rear wheel moves


YOU BETTER GET TO A BRAKE SHOP AND FAST, SOUNDS LIKE YOUR REAR BEARINGS OR TIE RODS ARE GONE AND YOUR PADS ARE WORN DONE SO BADLY THERE IS METAL TO METAL CONTACT. YOU BACK WHEEL COULD FALL OFF. VERY, VERY DANGEROUS.

Mar 03, 2011 | 1985 Ford Tempo

1 Answer

How can I get the springs back on rear brake pads on 1999 suburban? I took the brakes off and now I am having problems putting the springs back on. Any solutions on how to make this a little easier?


there is no springs on brake pads,
if you mean rear drum ,brake shoes,which springs are you having trouble with,the round cylinder springs that hold the shoes fast to the backing plate or the the return springs that bring the shoes back after being pushed out by wheel cylinders.

Jan 02, 2010 | 1999 Chevrolet Suburban

1 Answer

When the car is cold go to drive off it sounds


As you apply your car brakes, your brake pads/shoes wear against the brake rotors/drums. Rear brakes usually have brake drums. As your brake shoe linings wear (as would be the case for your car), the brake linings from the brake shoes have worn down to metal and they wear into the metal of your brake drums. After you park the car at night, the natural moisture in the air facilitates an oxidation (rusting) process along your brake drums. When you get in your car and take off in the morning, you have a light layer of rust that gets scraped off by your worn brake shoes. This is what is causing that annoying noise you hear in the morning (or after the car has been parked for hours). Simply put, you need a rear brake job. They will also check your front brakes and can let you know how much life you have left up front. If you continue to drive around like this, you'll end up ruining your rear brake drums and this will quickly become more expensive. When you have a rear brake drum job completed, they will likely "turn" your rear brake drums - which means they will put the drums on a mechanical lathe that will scrape any uneven surface into one congruous even surface.

Jul 19, 2009 | 2005 Nissan Altima

1 Answer

Metal scaping sound from the rear brake - pads are


Parking brake assembly inside the rear rotor/drum is worn out and scraping the drum. The brake cable could be sticking on, and if so will need replaced.

Jul 02, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Toyota Camry 2005-Brake pads noise problem


The rear brakes should last from 30000 to 60000 miles or 50000 to 100000 kms. So something is wearing out your brakes too fast. Are you doing the work or some shop. I also assume you have discs and not drums since you mention pads and calipers. I am not certain but usually you need a tool to turn the pistion in when putting in new pads. I would make sure the pads are releasing properly by raising rear of car, stepping on brakes a few times (with engine off and try see if wheels are free by spinning by hand, also try to use handbrake a few times and release it and see if wheels spin freely. Maybe rears always applied. Notice burning smell, are discs glazed from heat? Are you using really cheap pads. Also check the proportioning valve which will decrease pressure to rear brakes during hard braking. Do you notice rear wheels squeling during hard braking. Do you have antilock brake system? Also are you using good quality pads and rotors.

Apr 30, 2009 | 2004 Toyota Camry

2 Answers

Parking brake pedal goes to floor


Hello;
The parking brake cables may be stretched and in need of adjustment. Follow the cables along to a nut. Then you can tighten the adjusters up on both sides until you have the proper tension. Also make certain none of the brackets are bent or broken that the cables ride through.
Thanks;
RPM Northwest

Jan 19, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Back brakes


rear brake are just pads. but you will need a piston pusher. go to your local auto store and get a universal piston pusher. should look like a four sided block with peggs sticking out. make sure the e-brake is off, remove the rear wheels, remove the calipers and replace the pads push the pistons in with the universal pusher and reinstall the caliper.

Jan 04, 2009 | 2005 Mini Cooper

1 Answer

Right rear is making a sound of medal scraping medal. I believe it maybe the wheel bearings.


If it's a scraping sound, when does it happen? If it's when you hit the brakes, then it's likely your rear brake pads/shoes are down to the metal and are scraping. This can happen when you're not hitting the brakes, however. Bad wheel bearings are usually a moaning/roaring sound that increases as road speed increases. Ditto that for differential bearings - if they go out, you usually get a roaring noise that increases the faster you go.

Aug 10, 2008 | Ford Explorer Cars & Trucks

Not finding what you are looking for?
2005 Chevrolet Suburban Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...