Question about 1996 Mercury Grand Marquis

1 Answer

The turn signals and flashers are not working

How do I find the flasher control, it isn't in the fuse location?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Should b relay underneath dash usually black color & 3-5 pron plug & would have name writen on it

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Signal lights stopped working


If the fuse is good and the flashers work then you have a bad signal flasher, this car uses two flashers in one located under the dash, one controls the hazard lights and the other the signals, these are all inside one flasher, so turn on the hazards to locate it by listening to clicking noise. i have inclosed a diagram to help locate it. its on leftside kick panel by your left foot, replace the flasher and see if that does it, good day12_6_2011_6_03_02_pm.gif

Dec 06, 2011 | 1991 Honda Accord

1 Answer

Can not locate turn signal flasher unit. located hazard flasher but turn signal flasher is not on the same block even though the block is labeled for the turn signal flasher.


usually the one flasher serves both turn signal & hazard flasher, if either one isn't working you may have other problems.....hope this helps.....cheers.

Jun 27, 2011 | 1989 Plymouth Acclaim

1 Answer

The turn signals do not work when you use the signal switch. However, the emergency flashers do work. The fuse was checked and is good. Everything else on the signal stem works: the cruise control,...


if the fuse is good and all the lights work(if you checked them when the hazards were working)then you need a signal flasher,the signals have a separate flasher and it looks like the hazard flasher.if you turn on the hazards and look for it under the dash then you know what the signal flasher looks like,it is located on the fuse panel of in that area.

Mar 18, 2011 | Oldsmobile Bravada Cars & Trucks

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Turn signals and emergency flashers do not work


The turn signal flasher assembly is located under the driver's side of the instrument panel, on the front of the fuse panel, or under the center section of the instrument panel in the relay/flasher block. This is ,basically, the controller for your turn signals.

Click here to view a picture of the flasher switch.

Nov 22, 2009 | 1998 Ford Expedition

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

Turn signals and emergency flashers quit working.


check and replace the flasher unit if necessary, sometimes located in the fuse box area, sometimes under the dash near the steering column

May 18, 2009 | 1997 Ford Taurus

2 Answers

Where is the flasher for the turn signals in a 1999 ford explorer


The 2 fuses are no 10 (7.5amp) and no 21(15amp) in the interior fuse panel.The flasher is located on the base of steering column under dash. See this this pic find connector c214 on bottom 3rd from right.
http://i253.photobucket.com/albums/hh43/chuck943/EXN15113.gif

Mar 14, 2009 | 1999 Ford Explorer

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

Not finding what you are looking for?
1996 Mercury Grand Marquis Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...