Question about 1996 Dodge Caravan

1 Answer

Heater control only works on high

Heater works but you have to turn it on high ...the low or medium control doesnt work,nothing happens until i turn it on high then i do get real good heat. i dont know if it is the controller, a fuse, or maybe a resistor. i have to turn the heat controller on high to get heat. if i turn it on low nothing happens, no noise, no heat. please help!

Posted by on

  • Anonymous Mar 26, 2014

    When I turn on the A/C, Heat or Vent they only work on high and not low or medium.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need a blower motor resistor,and the heater blower motor should be checked for high amp draw. check Napa for the part or go to Dodge..prpbably about 60.00 dollars.

Posted on Dec 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does heat-air fan only work on high


Can you tell that the fan is getting higher or lower? Or is there no response from the fan control until you get to the high position?

Jun 24, 2014 | 2001 Chrysler Town & Country

1 Answer

1998 buick regal blower motor and resistor making a click sound on high but will not turn on


You should always make sure that the parts you put back are compatible with the parts you take off. If i am not mistaken, there is another fan resistor outside under the hood, and one inside under the passenger side dash panel, if your motor is inside. One outside is for high, and the one inside is for low, medium, and medium high. If you know for a fact both speed control resistors are good, replace the switch on the dash panel. To check to see if the dash switch is not making good contact, take the switch while it is still in, and on low, high, or medium, push the switch lever to the right or left gentlely to see if it makes any contact. These year model cars are notoriuos of having fan motor issues early........

Jan 28, 2014 | Buick Cars & Trucks

1 Answer

Heater blows cool when on medium and high


Heater core is partially plugged or the control valve for the heater is not working.

Jan 09, 2014 | 1999 Dodge Durango

1 Answer

1994 chevy kodiak with Cat 3116. Heater/AC blower shuts down


you should make a diagnostic to know what happened to your car
of course you need an auto diagnostic tool : http://www.chinasnoy.comand you can find all kinds of tools in chinasinoy.com

May 21, 2013 | Cars & Trucks

1 Answer

I have a 1992 chevy lumina that only the high on the heater control works. i have replaced the control panel the blower module checked the blower motor still only works on high.


either the switch or there is a resistor pack in the heater duct that gets burned out and only 1 side works if it is not the high medium low switch check resistor pack mounted in the heater duct.

Jun 23, 2010 | 1992 Chevrolet Lumina

1 Answer

Jeep cherokee Heater blower problem


Its not the switch or the controller in the instrument cluster. On my jeep there was a panel on the passenger side under the dash board. It helped me find it by turning on the heater and going toward the sound of the blower. On the backside of the panel was a series of little coils that control the different speeds. one of those coils had been broken.

Feb 20, 2010 | 1989 Jeep Cherokee

1 Answer

2004 chevy heater fan works on low and medium speed but not on high speed


There are two relays for the heater control fan,a low blower relay and a high blower relay.It sounds like the hi blower relay is bad.

Dec 12, 2009 | 2001 GMC Jimmy

1 Answer

Ac blower fan problems


change the blower resister module,if this doesnt work replace the control head

Jul 05, 2009 | 2000 Dodge Ram 3500

1 Answer

Heater blower went out?


Either the blower went bad or the heater relay went bad. This does not sound like a heater core problem unless you where smelling a SWEET smell when it was running.

May 16, 2009 | 1993 Toyota 4Runner

1 Answer

AC Control


the heater resistor is gone change it hope it help fixya our post thanks pierre

Jul 11, 2008 | 1994 Chevrolet C2500

Not finding what you are looking for?
1996 Dodge Caravan Logo

Related Topics:

510 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...