Question about 2007 Mazda B2300

1 Answer

Check engine light won't turn on when ignition is started.

Check engine light is out.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

If you have just aquired the car could be someone has removed bulb to hide problem or it could quite simply be the bulb.

Cheers John

Posted on Dec 19, 2008

5 Suggested Answers

alicantecoli
  • 22041 Answers

SOURCE: I turn on the ignition key, the "check engine" light stays off

dealer only ,problem with the factory immobiliser

Posted on Sep 10, 2009

  • 52 Answers

SOURCE: Turned on ignition, engine cranks

this is a quick easy way to see if you have a fuel pump problem,get under the vehicle and hit the fuel tank with your hand viguriously ,this will vibrate debree or loose wires ,Im telling you this because my 03 suburban did this same thing and after cking everything like you did i got under my vehicle{lay down beside the drivers door just enough to reach fuel tank} at bottom.then try to start vehicle if it starts then you know its fuel pump in gas tank.hope this is helpful

Posted on Jul 06, 2011

nicole99wu
  • 1049 Answers

SOURCE: Car won't start oil light battery light and check

this is an article showing you why the battery light on.

Posted on Jul 27, 2011

muntejaya
  • 10421 Answers

SOURCE: starter goes on but car won`t start no fire on

Hi Dennis,

You need to track the power goes to your ignition coil. It should has 12VDC while you start or run the car. If there is power 12VDC there, now check your coil. You should have blue spark while it connected to the ground. If nothing there, replace your coil with new genuine one.

Regards

Posted on Sep 29, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Holden barina won't start and check engine light is flashing


Check Engine Light On - Auto Diagnosis Repair Help

www.aa1car.com/library/mil.htm
The Check Engine Light (which is actually the Malfunction Indicator Lamp or ... you can assume the fault that is causing the Check Engine Light to come on is probably minor and won't hinder your ability to continue driving. ... When the ignition is turned on (don't start the engine yet), the tool will .... flashing check engine light ...

What Causes the Check Engine Light to Come on in a Car?

www.wisegeek.com/what-causes-the-check-engine-light-to-come-on-in-a...
Nov 7, 2015 - When the check engine light comes on, take the car to a reputable mechanic .... I went to go home. the check engine light was blinking and it won't start. ... I looked in my manual book for 2001 holden barina car to see what the ...

Car cranks but won't start, Check Engine light blinking ...

www.evolutionm.net/...engine.../424408-car-cranks-but-won-t-start-chec...
Jun 1, 2009 - I tried to turn it back on but it would only crank and not start, the check engine light is also being really weird, it's blinking on and off pretty quick.Missing: barina

Check engine light flashing car won't start - RX8Club.com


Dec 09, 2015 | Holden Cars & Trucks

2 Answers

00 olds alero


Check fuse,could be starter.check battery connection, how old is battery.

May 07, 2013 | Cars & Trucks

1 Answer

The engine light does not come on when I turn on the igintion. would that keep the car from starting up. it cranks but won't start up. 97 avalon


check all your fuse under bonnet or under driver or passenger compartment site.i like to know if you have immobilizer alarm in your car.

Oct 02, 2012 | Toyota Avalon Cars & Trucks

2 Answers

I changed the oil in my 98 concorde and now it wont start. The oil light is on but not the check engine light.\


do you here the fuel pump working when you turn the key?If not could be a fuse that runs the fuel pump.

Aug 05, 2012 | 1998 Chrysler Concorde

1 Answer

Just won't start! fuel pump ok, filter ok, psi ok, turns over just won.t start


You'll have to figure out if it is a fuel or ignition problem.
Is the check engine light on ? Have you checked for trouble codes ?
It could be a relay, the ignition module, coil, or a list of other things.
Even the fuel pump.
If this is a vortec V6 it takes at least 60psi to cover the injectors.

Jul 03, 2012 | 1997 GMC Jimmy

3 Answers

2009 HHR won't start. Battery is good.


Is the security light on or blinking?If not then do you have power to the starter.You can check this with a test light.You should have power when you turn the key to start.The test light should light up.Should be the small wire.I believe it is purple in color.If the security light is on then you will have to get the codes to see what is causing the no start.Hope this helps.Good luck.

Dec 07, 2011 | 2009 Chevrolet HHR

1 Answer

Stop on stop sign engine died


If the engine won't fire up, but your starter turns over, you may want to check your timing unless you have a check engine light on. If the CEL light is on, have the codes scanned.

If the engine won't turn over with the starter or it clicks, have your battery tested at autozone or advanced auto parts. Replace the battery if it is bad. Else, have your starter tested.

If the engine still won't turn over and the battery and starter are tested fine, you may have a blown fuse, bad ignition switch, or a failed relay.

If the engine fires up but randomly dies and starts back up, you either have a failed sensor, failing fuel pump, clogged fuel filter, bad plugs or wires, or a failing ECU.

Sep 06, 2011 | 1996 Nissan Quest

1 Answer

Have to turn the ignition on and off several times to get the fuel pump working


Your Jeep ecu is in need of repair. Your jeep is having a common problem known as the "Delayed check engine light" starting problem. Next time you try starting the jeep and it the fuel pump won't prime, look at the dash.....the check engine light is not on and the fuel pump will not come on until the check engine light eventually come on, on the dash. Have it repaired and it will eliminate the delayed check engine light start problem.

Aug 15, 2011 | 1995 Jeep Grand Cherokee

1 Answer

95 grand cherokee no start, it turns over but won;t start, trying to find the pcm connector pin out diagram


If you don't have a check engine light that lights up on the dash when you turn your ignition key to on, then your ecu has gone bad, internally.

Nov 04, 2010 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...