Question about 1994 Dodge Grand Caravan
I have installed a new thermostat but still not getting any heat.
Pretty common on those. I used CLR and disconnected my heater hoses & with a small pump, I ran CLR only, through the heater core, and let it sit in there overnight, flushed it through again next day, back flush as well. re-connect hoses, run engine with heater on, and rad cap off until the rad fan comes on 2 or 3 times, then put cap back on, to bleed air out of system. Cleaned it out enough to get the heat flowing again. If you changed thermostat and didn't let it run with heat on, and rad cap off for a while as described above, then do that first, just to make sure you haven't just got an air lock in the system.
Posted on Dec 19, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 27, 2010 | 1988 Dodge Caravan
May 29, 2010 | 1994 Dodge Grand Caravan
Dec 03, 2009 | 1994 Dodge Caravan
Dec 19, 2008 | 1994 Dodge Grand Caravan
228 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: