- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The plenum may be cracked, check for air blowing out where it should not, or the blender door is not opening, a cable sheath may have popped loose, or the heater core itself is clogged with leaf debris blocking air flow..
most likely you have a blend air door cable that has either been broken, disconnected or stripped out. there are blend doors that control the direction of air flow, and another one that controls temprature. look fr a cable coming from the back of the unit, or if it is a electric then you will have to trace wires. the temp door should be in the rea behind thee glove box.
your fan motor is shot, motor has bad brushes replace it, if u feel its still not hot, drain your rad and but a 28 oz bottle of pine sole and add water till full, run it for about 20 mins. drain, run strait water, drain, then put anti frezz in with water, 50/50 mix or mix your own. it should clean your cooling system compleatly out.. do not turn heat on while pine sole is running throw it, gives of a bad smell.