Engine mounts i need a diagram of where the mounts are located.

There are three mounts. One at the front of the engine and one under the transmission. Then a torque bar under the middle.

What engine do you have? it is located passenger side front, if V6 it is behind/below A/C compressor

Borrow a repair manual for it,From a libarry,

Unfortunately, it doesnt really give any information on removing / installing the engine mounts other than to raise and support the engine assembly with a suitable device and then unbolt and remove the engine mounts... Hope this helps

4 total. Two on the passenger side (upper and lower) and two on the driver's side, upper and lower. The "dog bone" type strut mount is the same for either side.

this is trans. mount..there are about 5 different motor mounts....

sorry I don't have a diagram but you might be able to find one in the engine compartment on the very front of the engine compartment on the radiator support or on the underside of the hood.This is just a suggestion to help you find a diagram.Some cars have a diagram on a sticker mounted in any one of these locations.

Exploded view of the EGR valve mounting (3.1L engine)


EGR valve mounting arrangement (3.4L (VIN X) engine)


View of the EGR valve mounting (3.8L engine)

The Constant Control Relay Module (CCRM) is in the right hand front of engine compartment, mounted to upper radiator support.

Google 1997 Dodge 3.5 liter Engine Mounting Diagram. Same for the 2002 engine. I guarrantee you will find it.For some strange reason you would'nt call your local Dodge dealer and ask them where you can go to on the web and locate it.

I’m happy to help further over the phone at https://www.6ya.com/expert/phillip_293d34ebcf028794