Question about 1988 Toyota Camry

1 Answer

My heater blower randomly works and then doesn't work

My heater blower works great and then stops working. I heard a noise in the dash too when it is running that is a new sound. I am not sure if it is a fuse or if the blower itself is going out and will ultimately stop working altogether or if it is a loose connection.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

Check the resistor between the wiring and the blower under you dashboard. It is a small gadget. Not an electronic resistor as in TV resistors.I don't know what kind of noise . Is it a clicking noise a whirling noise ? what kind ? If this helps please vote.

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blower motor stops working randomly


May be a worn out blower motor or burnt wire on resistor for blower motor

Nov 15, 2012 | Cars & Trucks

2 Answers

I have a 1994 Chevy Silverado and every time I turn on the ignition, the knocking noise begins from under the dash somewhere. If I remove the fuse to the a/c/heater it doesn't make a sound when I


Try starting the truck so it makes the noise.
Then switch the air control to "fresh".
If noise stops, it is probably the motor that closes flap to recycle the cab air.
It would be found under the dash, under the glove box, & would need to be replaced.

Sep 20, 2012 | Cars & Trucks

2 Answers

A/C blower and selector doesn't work, overhead console doesn't work


Sounds like this may be the actual control head that went bad, unfortunately there is no way to test for this other than to replace the control head, if the blower motor relay is good, and all the fuses are good, then that would probably be the most likely problem... hope this helps

Sep 08, 2012 | Cars & Trucks

1 Answer

High speed doesn,t work on heater switch.


Pull the heater control panel out of the dash and inspect the blower speed control switch, look for signs of a burnt connector to the switch, it will be discolored looking, if this is the case replace the switch and install a repair connector

Jul 19, 2012 | Cars & Trucks

1 Answer

Heater / air conditioner fan control doesn't engage fan. Previously, it only worked in high speed.


I would replace the blower motor resistor first then see if that corrects this. The resistor is located next to the blower motor under the dash.

Jul 16, 2012 | Cars & Trucks

1 Answer

I have a 1994 honda accord lx..heater fan was makin funny noises for a while..then stopped working..started working and stopped again..Is it hard to replace..could it be a fuse..I;m a girl..could I do it...


The heater fan is on the right side floor board under the dash. It is a little tough to do but not extremely hard. If the blower was making noise, it could be something in the heater housing. If it is starting and stopping it is probably the blower motor. When replacing the blower motor you may have to remove the fan from the motor depending on where you buy a new one. The fans (usually made of plastic) break very easy. If you attempt this, be very careful in removing the fan.

Under the dash on the right side you will have to lay on the floor and look up. There may be a lower dash panel to remove. The motor is just below the glovebox. Removed the wire, remove the bolts/screws attaching the blower to the housing. Remove the blower.

Dec 29, 2010 | 1994 Honda Accord

1 Answer

My AC unit is not working ,blower is not coming on


your blower motor failed and you need to replace it

Aug 20, 2009 | 1990 Mercedes-Benz 190

1 Answer

Heater Blower


have you turned on the switch and checked for power at the blower plug? if so and you have power there then it is a blower motor if not then check fuse under dash and fusable link under hood around blower motor someplace close.

Dec 27, 2008 | 1993 Buick Park Avenue

1 Answer

93 cherokee blower/heater not working


Replace your blower resistor located under the passenger side dash.

Dec 14, 2008 | 1993 Jeep Cherokee Country

Not finding what you are looking for?
1988 Toyota Camry Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...