Question about 1989 Chevrolet G20

1 Answer

Wipers quit and need to get to motor. - 1989 Chevrolet G20

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 337 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 chevy venture and the wipers were working and then they quit, but the wiper motor is running, what could cause this?


recheck the wire again and check the wipers to make sure they didn't come disconnected at the motor arm

Nov 24, 2014 | Cars & Trucks

1 Answer

Wiper suddenly quit working


1st thing is test the wire to the wiper motor on the harness with the ignition on and wipers turned on. If you have power to the motor you need a motor, which would be my guess to begin with. Good luck

May 27, 2014 | 2004 Buick LeSabre

1 Answer

Wipers quite working when you turn them on you hear nothing I have replaced the motor and still nothing what now


May be a fuse, May be the wiper switch. You could pull off the wiper motor connector and check for power present, when key is on and wiper switch is on. If no power, check for a blown fuse, or the wiper switch may need looking at to see if power is getting to the switch.
If you do have power at the motor, and still no go, it is probably the ground for the wiper motor.
Good luck.

Jan 03, 2013 | Cars & Trucks

1 Answer

Just replaced the wiper motor on Jetta and wipers still won't work


Have you replaced only the motor or including the gear box (where the input shaft to the linkages is located)?

Oct 23, 2012 | 1999 Volkswagen Jetta

1 Answer

The wipers quit on my 06 cruiser. they had been coming on and off by themselves for a while and then just quit. the back wipers work fine.


if power to wiper motor, then replace the wiper motor. if no power when switch is on, it is most likely the wiper switch thats bad. check the relays and fuses first! good-day!

Aug 22, 2011 | 2006 Chrysler PT Cruiser

1 Answer

My windshield wipers quit working. getting juice to one of the 3 wires.


one wire will be power one wire will low speed wiper and one wire will be high speed wiper.you need to check the grounding of the wiper motor.if you take a jumper wire and attach one end to the battery, or a good ground at the motor or somewhere and the other end then make good contact to the body of the wiper motor and it should work,if it does then you need to permantly hook up a ground wire to the wiper motor.this was a common problem.

Mar 08, 2011 | 1978 Chevrolet Chevette

1 Answer

Intermittent wipers quit this morning


It is most likely the circuit board on motor module.

Jul 26, 2009 | 2000 Chevrolet Venture

2 Answers

I have a1992 ford explorer the front and rear wipers quit workin


check for power at the wiper motor. If power at the wiper motor but no wiper action then replace the motor. if no power at the motor then use a jumper wire and put power to the motor. Does motor run? if so check for open circuit in the wire someplace.

Dec 27, 2008 | 1992 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...