- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First check the fuse box under the hood for a blown or poorly connected fuse. Next, find the wires going to the wiper switch and check for power when you turn the switch on. Finally, if there is power everywhere you checked, go directly to the motor and check it for getting power. Also check the ground wires for this device. If no ground...no action!
Hello, check under the engine hood. There could be a couple of black boxes with lids on them. Inside of these boxes are some fuses and relays. Under the lids of these boxes will be description of what fuses and relays are located in the box. Also, look around and see if you can locate the wind shield wipers electric plugs. Check this plug for corrosion, if it is corroded then clean the contact and use some dielectric grease on this plug. GB...stewbison
Chech the Fuses, wiper motor, and on/off switch (all need to be checked out) on/off swith can wear thin and no longer make contact inside the switch and wiper blades need to be in good working condition. Refer to you owners manual in the glove box for info on fuses, their relations to other systems and locations in the fuse box.
There is a Fuse for the Wipers on the Box inside the Car. There actually could be one in the Relay Fuse Box under the Hood also. This box Shoud be on the Drivers Side up torwards the Firewall of the Car.