Question about 1989 Isuzu Amigo

2 Answers

Shifting to four wheel drive.

Friend has a 1989 Amigo that is a standard transmission.. How would they shifr it to four wheel drive?? It has a shifter on the floor but it also has a button on the dash or looks like a button.. Any idea???

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

How to fix temperature guage

Posted on Apr 04, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

If the Amigo is like other fwd setups,you should be able to pull the floor shifter back one notch for fwd in the standard(or high)driving range.I don't know if you can shift "on the fly" with the Amigo,so I would shift it to 4x4 while stopped in nuetral. When you pull the shifter to the left(towards the driver)and all the way back,that should be 4x4 in the low range(for speeds under 20 mph only). I would not recomend that you drive you vehicle on the highway in low range....The button on the dash may actually be a light to let you know when you are using the fwd. Make sure you kick it back to 2wd when you return on dry pavement.Any Isuzu dealers' service department can also help you on the matter. Good Luck!

Posted on Dec 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987 mazda b2000 2-wheel drive pickup wont go in reverse. how do i get reverse back on shifting fork?


You will need to remove the shifter tower (four or five bolts hod it in the transmission.) and look at the parts for wear.

May 25, 2012 | Cars & Trucks

1 Answer

1995 jeep grand cherokee grinds when shifting into full time four wheel drive. What gear should the transmission be in when shifting four wheel drive?


Try neutral. or in drive, but just crawling. Give light pressure to the stick and sort of let it just fall into 4x4

Jan 08, 2011 | 1995 Jeep Grand Cherokee

1 Answer

1998 Ford Explorer 2 door 4-wheel drive. My


You need to remove the trans pan to inspect the parking pawl and rod. Hopefully you can adjust or repair with trans in your vehicle.

Also don't assume your cable etc is okey. You don't know that. You may be able to adjust it and be okey.

Jul 28, 2010 | 1998 Ford Explorer

2 Answers

The van is in drive in all dears Even Park And in rev. it gose"s foward ??


This sounds like the linkage that connects the shifter to the transmission has come apart or broken. Have a good look at this less expensive fix before you pin it on that very expensive transmission. Hope this helps. Good luck.

Nov 18, 2009 | 1989 Dodge Grand Caravan

3 Answers

Wont shift back from 4x4 low, to 2x2


I also have a 2002 Envoy. Shifting to and from 4wh and 4wa can be done on the fly but shifting to 4wL has to be done stoped and while in neutral. Try that. Otherwise I'm afraid its a new computer for you. Its located under the left rear seat and you need a loan for one.

Sep 05, 2009 | 2002 GMC Envoy

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

98 Chevy K1500, four wheel drive floor shifter won't engage.


I had the same problem with my 98 z71, I put the floor shifter in neutral, and let the truck roll backwards a little bit, BE CAREFUL, with the floor shifter in neutral the truck will roll, regardless if the shifter on the steering column is in Park, use caution, make sure there is no one around your truck and you are inside of it and out of the path of doors and tires,

Dec 15, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

82189 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14436 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...