Question about 1994 GMC Sonoma

1 Answer

95 GMC Sonoma --- Brake Lights and Turn Signals --- NOT WORKING

We have a 95 GMC Sonoma. The hazard button is broken.....does this affect the brake lights and the turns signals because now they are not working?? We have replaced all the fuses.

Posted by on

  • Anonymous Mar 21, 2014

    i have 95 gmc sonoma 4x4 my 4x4 don't work when i need it the light comes but actual 4x4 doesn't engage why?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

Yes , i have a 96 mine done the same thing , i was removing the dash cover to install a radio accidently broke mine , i had to push down on what remained and wedged a sheetrock screw to hold it in place till i could get a new one

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

2 Answers

I have a1998 GMC Jimmy 4x4/ 4 door slt. The blinkers don't work on the front or back of the vehicle. No indication of the green arrows on the dash board our a relay tick either. Also my brake lights don't...


Try wiggling the turn signal switch and see if brake lights and or turn signals start working.Gm did have a recall on the multifunction switch on later models but it did affect earlier models as having the same problem. It's is possible that the multifunction switch is the cause of it all but is also possible that the flasher relay has gone bad but the relay wil only affect the turnsignal and hazrd flashers.

Apr 23, 2011 | 1998 GMC Jimmy

1 Answer

My brake lights and hazards stopped working. All other lights work. The bulbs and fuses are good.


IT SOUNDS LIKE YOUR FLASHER FUSE IS DEFECTIVE. IT WORKS BOTH HAZARDS AND TURN SIGNALS. YOUR LOCAL PARTS STORE SHOULD HAVE IT VERY CHEAP

Aug 06, 2010 | 1994 GMC Sonoma

1 Answer

Lights Issue


no it is hazard flasher canister thats in the fuse box

Jun 10, 2010 | 1993 GMC Sonoma Club

3 Answers

I have no brake lights or turn signals on my 95 gmc truck. I have replaced the boards but no luck. Also have checked fuses.


OK if the fuses are good , use a test light and check to be sure you have power at the fuse terminals. you'll check from ground to the terminal on top of the fuse. you should have 12vdc. then , check for power at your brake light switch on both terminals while the brake pedal is pressed, it is located located on the brake pedal assembly. also , check your hazard flasher switch to be sure it is not on. if it was on, check your flashers, both the turn signal and hazard flasher. If everything checks out , your problem is probably in your turn signal switch assembly located in your steering column.

Mar 14, 2010 | 1995 GMC Sierra

1 Answer

95 gmc jimmie, 4x4, everytime i use my brake pedal, a fuse blows, i have no brake lights, hazard or signal lights. how do i fix it my mom broke off the hazard button in the steerin column so i used a stick...


consider properly repairing the hazard light switch via junkyard parts for a cheap price. You invariably have a short that overloads the fuse when you activate the brake lights via pressing on the brakes.

good luck

Mar 10, 2010 | 1995 GMC Jimmy

1 Answer

No brake/hazard lights,have running/turn signal lights


Suggest you change hazard flasher 'can' first, then go to the hazard switch. I'm betting it's the flasher can.

May 11, 2009 | GMC Sierra 2500 Cars & Trucks

3 Answers

Brake lights don't work. Fuse is good, bulb is good, but brakes still won't come on. GMC Sonoma 1994.


please check your brake light switch located near the brake pedal. it could be faulty.

tnx 4 using fixya,

drcool

Sep 24, 2008 | 1999 GMC Yukon

Not finding what you are looking for?
1994 GMC Sonoma Logo

965 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...