Question about 2005 Buick Rendezvous

1 Answer

Cruise Control Does not Work

The cruise on my Rendezvous does not work at all.  It won't turn on or hold speed at all.  All fuses are fine, and turn signals, wipers and high beams (everything else on the control arm) all work perfectly.  There are no error codes for the VSS or anything else for that matter.   Any ideas?

Posted by on

  • scosworth Dec 28, 2017

    My '05 Rendezvous was missing a fuse in the center console that fed voltage to the brake pedal switch. I had replaced the cruise module and it didn't fix the problem, but the fuse made everything work. The fuse also powered the air bag display letters on the center rear view mirror.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Check ur brake switch on the scanner and make sure it
does not show switch is applied with ur foot off the brake also a brake light out
on some models could also dissemble system

Posted on Jan 01, 2018

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
Murphybanton
  • 2004 Answers

SOURCE: BROKEN CRUISE CONTROL 2002 BUICK RENDEZVOUS

A fuse is broken. Let an expert check to determine this.

Posted on Apr 10, 2009

  • 23 Answers

SOURCE: non working cruise control 1993 Buick Lesabre

On mine the check engine light came on which was the TPS. I replaced it now cruise works great

Posted on May 08, 2010

Testimonial: "never thought to watch the test of the warning lights when you turn on the ignition , well the check engine light was out replaced bulb and hooked up the code reader because the light was on after starting the car , the code reader said TPS replaced it and now have a working cruise again . Thanks hoop your saved me a bunch of money"

saa_aa
  • 241 Answers

SOURCE: cruise control

make sure your switch cruise on off is OK (not bad) .

Posted on Dec 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cruise control does not work on 1994 Ford 150. Fuse is fine, where to look next? Thank you


Which fuse ? There are two that supply B+ to the speed control servo ! One is located in the under hood fuse box and the other in the fuse panel inside the vehicle > The fuse may look fine but is there B+ voltage across the fuse . Check it with a volt meter . Check B+ voltage at the speed control servo , Black with yellow trace and P/O wire , what ever color that is . Is there B+ at the control switch ? The speed control servo supply's voltage to the cruise control switch . You can check it at the speed control servo as well . They could be videos on youtube showing how to test it .
Diagnose cruise control failure on 1993 Ford 150

May 31, 2017 | Ford Cars & Trucks

Tip

TROUBLESHOOTING WHY YOUR CRUISE CONTROL DOESN'T WORK


There are many things that can cause your cruise control to act up or not work at all. This article will lead you in the correct direction on finding a solution to your problem. This article is for any type of vehicle.<br /> <br /> <b>If your cruise control won't hold proper speed, </b>you need to look at the following parts. <br /> <ol> <li>Faulty Cruise Control</li> <li>Faulty Speed Sensor</li> <li>Faulty Vacuum or Vent Valve</li> <li>Faulty Stepper Motor</li> <li>Faulty Transducer</li> <li>Incorrect Cable Adjustment</li> <li>A Binding Throttle Linkage</li> <li>Leaking Vacuum Tank</li> <li>Leaking Vacuum servo diagram</li></ol> <b>If your cruise control surges, </b>check the following parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Faulty Speed Sensor</li> <li>Binding Throttle Linkage</li> <li>Kinked Speedometer Cable</li></ol> <b>If your cruise control cuts out on you, </b>check the following parts.<br /> <ol> <li>Faulty Transducer</li> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Brake or Clutch Switch Adjusted too tight</li></ol> <b>If your cruise control doesn't work at all, </b>check these parts.<br /> <ol> <li>Faulty Cruise Control Module</li> <li>Short or Open Circuit in Cruise Control</li> <li>Faulty Clutch or Brake Switch</li> <li>Leaking Vacuum Circuit</li> <li>Faulty Stepper Motor</li> <li>Faulty Speed Sensor</li> <li>Faulty Transducer</li> <li>Faulty Cruise Control Switch</li> <li>A Blown Fuse</li></ol>

on Jul 20, 2011 | Ford F-150 Cars & Trucks

1 Answer

Cruise control not working


cruise controls are dependent on the following sensors all working together
brake sensor
clutch sensor
auto--vehicle speed sensor
rpm's sensor
fuse for the cruise control
cruise control switch either or all not working will stop the cruise control from engaging
road speed at which you can engage the cruise control has to be above a reset speed before it will cut in and work

Sep 05, 2015 | 2009 Chevrolet Chevrolet Equinox LS

4 Answers

2005 Chevy trailblazer ext problems 1. Cruise will not set.worked last on 4/12/15 2. While checking fuses for CC problemdome lights stopped working, but worked fine before checking fuses. PLEASE HELP!


Bummer deal! This may be a way to tell you some tail lights are burnt out. Some cruise controls have a fuse in a second location.
The fuse is not in right or is blown. Check with a new fuse. Hope this helps. ...gc http://www.auto-tune-up-and-repair-options.com/

Apr 20, 2015 | 2005 Chevrolet Trailblazer Ext

2 Answers

How do I set cruise control on 2001 buick lesabre limited. just bought car have no manual. cant get it to set.


If you push on and set and nothing happens, the system may not be working properly.
You can get an owners manual on Ebay.

Mar 22, 2015 | 2001 Buick LeSabre Limited

1 Answer

CRUISE CONTROL WON'T WORK ON 2005 CHEVY TRAILBLAZER


check cruise control fuse and check the brake lights see if brake light working because the brake light switch will deactivate cruise control when brakes is applied.if brake lights dont work either fuse blowed or switch bad.if all is good have vechicle code scan because cruise control control by PCM and vechicle speed sensor and thottle actuator control motor.

Apr 17, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

My cruise control light does not turn on when I push the button. I am thinking it is a fuse but it is not labeled in the 2 fuse copartments. Can you please tell me which fuse is for the cruise control on...


Is your cruise control working? Check your brake lights and make sure that they are all working. If they aren't working your cruise control won't work that includes the light.

Sep 10, 2011 | 2000 Nissan Frontier

1 Answer

We had the throttle and hoses off for a thermostat replacement and now the cruise control light comes on but will not maintain speed. I would like to narrow down which hose is responsible for cruise. I...


Sounds like the cruise cable was not reinstalled and needs to be hooked back up.There is no hose related to the cruise for this vehicle as it is electric/mechanical.

Feb 03, 2011 | 2002 Buick Rendezvous

2 Answers

I own a 2005 GMC Canyon Five CYL and the cruise control stopped working last niight. You push the button and no cruise. I checked the fuse and it is ok I exchanged with another 10AMP and no change still...


Start with the simple and check the fuses and the Stop lamp switch. Check your brake lights, if they're not working, the cruise won't work either. If they're not working, check the fuse for them, if the fuse is fine, then take it into the dealer, there's been a recall issued on the brake switch, so it should get fixed for free.
Cruise Control Disengaged
The powertrain control module (PCM) disengages the cruise control operation based on the signals from the following switches:

* The stop lamp switch
* The TCC brake/cruise release switch
* The clutch release switch, if equipped
* The cruise control On/Off switch

The TCC brake/cruise release switch and the stop lamp switch are mounted on the brake pedal bracket. When the brake pedal is applied, the normally closed TCC brake/cruise release switch opens and the normally open stop lamp switch closes. The PCM detects a low signal voltage on the TCC brake/cruise release switch signal circuit and a high signal voltage on the stop lamp switch signal circuit. When the clutch pedal is applied, the normally closed clutch release switch opens and the PCM detects zero voltage on the CCP switch signal circuit. The vehicle speed stored in the memory of the PCM will be erased when the cruise control On/Off button is turned OFF, or the ignition switch is turned OFF.

The Cruise Control System will disengage when the PCM detects that a driver override function has been active for approximately 60 seconds .

When the Cruise Control System is disengaged, the PCM sends a class 2 message to the instrument panel cluster (IPC) in order to deactivate the cruise control indicator.

Cruise Control Inhibited
The powertrain control module (PCM) inhibits the cruise control operation when any of the following conditions exist:

* A cruise control related DTC has been set.
* The vehicle speed is less than 40.2 km/h (25 mph) .
* The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.
* The engine RPM is too low.
* The engine RPM is too high, with fuel cut off.
* The vehicle speed is too high, with fuel cut off.
* The system voltage is not between 9 volts and 16 volts .
* The Traction Control System (TCS) is active for more than 2 seconds .

Thank you for using Fixya and start with replacing the stop lamp switch. Even though the brake light work, it;s been known for that switch to cause your issue. that's way there was a recall for it.

Apr 01, 2010 | 2005 GMC Canyon

1 Answer

BROKEN CRUISE CONTROL 2002 BUICK RENDEZVOUS


A fuse is broken. Let an expert check to determine this.

Apr 10, 2009 | 2002 Buick Rendezvous

Not finding what you are looking for?
2005 Buick Rendezvous Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...