Question about 2003 Chevrolet Silverado 1500

1 Answer

I have a 2003 Chevy Silverado Ext Cab Z71, no sound is coming out

No sound is coming out of my speakers. No radio, no warning chimes, nothing. I think this happened before and it fixed itself years ago. But now it's been a couple of days and still no sound. Everything else is working fine. Can someone help!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

Seat belt and any warning chimes do not come from the radio, they usually come from a unit under the dash, what you are describing is probabl;y a blown fuse problem. I would checkfuses with a teat light as some fuses may not appear blown.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My aftermarket radio is not working in my 2005 Chevy equinox. Do anyone know why? It's a new radio and all of the wires are connected properly. The chimes stopped working as well. Fuse are new as well


The chimes work through the factory radio , come out driver door speaker . There is a interface module you need to hook up on GM vehicles so aftermarket radios will work . With these newer vehicles your better off taking to someone or place that does this on a daily basis . Does it start an run ? If it does i'm surprised , factory radio is also hooked to the vehicle serial data network , class 2 . Suggest you google that .

Battery positive voltage is provided to the radio from the Radio (15A) fuse in the fuse block. The radio is grounded through a braided cable case ground. The radio is enabled/disabled by Class 2 messages from the body control module (BCM). The entertainment system on this vehicle is configured with a base and uplevel system. The base and uplevel systems contain a radio, antenna, speakers, and on some vehicles an audio amplifier.

The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings. The BCM receives audible warning requests via the class 2 serial data line or the controller area network (CAN) data line. If the BCM receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
Fast rate chime--200 pulses per minute
Medium rate chime--150 pulses per minute
Slow rate chime--50 pulses per minute
Single chime

Mar 15, 2017 | Cars & Trucks

1 Answer

Is there a way to fix the the turn signal chime and other various chimes on a 2009 Chevrolet Cobalt LS, there is no sound from them as well as front speakers?


The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the speaker. The radio receives audible warning requests via the serial data circuit. If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
?€¢
Fast rate chime (200 pulses per minute)


?€¢
Medium rate chime (150 pulses per minute)


?€¢
Slow rate chime (50 pulses per minute)


?€¢


Single chime

May 13, 2016 | 2009 Chevrolet Cobalt

1 Answer

Done an alt. change after doing a tune up truck ran than just shut down now will not start


Truck ' DIY Forums

www.diyforums.net/truck-2418/
My 2003 chevy Silverado V6 truck turns over but will not start..it acts lik. ... iS IT HARD TO REMOVE AN OIL PAN ON A 4.3 VORTEC S-10 PICK UP TRUCK ...silverado 1500 ext. cab. my problem is while driving on the highway my truck ... mytruck then took off the terminal to see if the alternator was work and now i have no .

Chevy Silverado and GMC Sierra Stalling Problem - Car Forums at ...

forums.edmunds.com > GMC > GMC Sierra 1500

Apr 4, 2008 - 30 posts - ‎22 authors
I can feel the truck hesitate or bump while changing lanes on the highway (70-80 MPH) if it ... Now it idles ... My truck has a 4.3 with automatic. trucks runs great after about a hour it .... It will idle and drive just fine, but will simply shut down. ... the not firing problem, but shuts off after it finally decides to start. Chevy Silverado and GMC Sierra Gasoline Engine ...
30 posts
Jun 14, 2010
Chevy Blazer Fuel Pump and Pressure Regulator Problems
30 posts
Mar 10, 2010
Chevy S10 - GMC S15 and Sonoma Stalling/Dying ...
30 posts
Dec 14, 2007
Silverado starting problem...
30 posts
Nov 15, 2007
More results from forums.edmunds.com

Dec 26, 2015 | 2004 Chevrolet Chevrolet Silverado 1500...

1 Answer

What causes the chime on the ignition not to sound, the seat belt warning not to sound, and the radio speakers not to work sometimes? at other times they work.


hi

sounds like a electrical problem

i would take it in for a free quote to identify the problem

there is definitely a loose connection or loom

25718376-m35oz4jvdfvvmght4a51n0jl-2-0.jpg
cheers

May 28, 2015 | 2004 Chevrolet Chevrolet TrailBlazer EXT

1 Answer

Will a 91 Chevy z71 4x4 trans work in a 93 z71 4x4 only diff in truck is 93 is Ext cab


in 1991 chevy used 3 differant trasmission's a 4L60-E, 4L80-E and a 700R4 in 1993 they used 2 differant transmissions a 4L60-E and a 4L80-E if your truck has the 700R4 then the 93 transmissions will not work if you ned to find out what you have in your truck and what is in the other truck. if they are the same they will swap the only diffance in the ext. cab and reg cab is the drive shaft. but the transmission have to be the same modles a 4L60-E will not replace a 4L80-E and nothing will replace the 700R4.

Sep 07, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

No warning chime for 2006 Ascender


I don't think it is a fuse.
The warning chimes for this vehicle come through the radio and are play to the speakers and if I remember correctly the chimes play to the left front speaker.
I would check for a faulty speaker or wiring to the speaker.

Sep 09, 2009 | 2006 Isuzu Ascender

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

2 Answers

Fuel gauge problem


sending unit on the fuel pump in the tank is stuck, and needs to be replaced. its expensive, but that will fix your issue. its the housing around the pump that has the float arm on it. you can try to free the float arm by removing your pump assembly, but cant guarantee its any good after being stuck

Mar 09, 2009 | 1996 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

1,033 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...