Question about 2004 Honda Accord

2 Answers

ENGINE LIGHT ON SLIGHT LOSS OF POWER AND POSSIBLE RATTLE

WE HAVE CARRIED OUT A CODE REAR AND HAVE A FAULT CODE P2004 INTAKE MANIFOLD RUNNER CONTROL STUCK OPEN . WE CAN NOT LOCATE THE MANIFOLD RUNNER CONTROL , WE HAVE CLEARED ALL FAULTS AND THE CAR IS RUNNING OK BUT I THINK THE FAULT MAY RETURN . IF YOU COULD HELP WITH PROBLEM I WOULD BE VERY GREATFULL , THANK YOU DARREN

Posted by on

  • Anonymous Mar 15, 2014

    F150 truck 4.2L INTAKE MANIFOLD RUNNER STUCK OPEN

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 449 Answers

P2004 (Intake Manifold Runner Control Stuck Open)You need to take a look at the IMRC actuators on the intake manifold. You can try using a screwdriver or other tool to move the actuators to see if one is stuck in the open position. Do not use your fingers to do this, because if one is open and decides to close it has a bit of force behind it and can injure you. If the IMRC is stuck open, it is usually due to deposits in the intake manifold. Repair involves removing the upper intake manifold and cleaning out any deposits in the IMRC plate area. I would try running some Techron Concentrate in 2 tanks of gas to see if it dissolves enough of the gunk on the plates to free up the stuck one. Certainly a lot cheaper than having to pull the intake manifold and cleaning the plates. Always run tier one gasoline like Shell or Chevron to reduce the buidup of deposits.

Posted on Dec 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Were can I find the manifold

Posted on Dec 05, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2008 dodge avenger code p2004


Intake Manifold runner control stuck open - bank one:
- Intake Manifold Runner Binding Or Sticking
- Faulty Manifold flow valve
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection

There is a factory service bulletin for this problem for 2007-2008 Dodge Avengers. (JS)

Sep 22, 2015 | Dodge Cars & Trucks

1 Answer

How to fix code p2004 on 2005 ford focus


you code is here

P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1


Possible causes - Intake Manifold Runner Control (IMRC) monitor signal shorted to power
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Intake Manifold Runner Control (IMRC) solenoid
- Damage Powertrain Control Module (PCM)
- Blocked vacuum hoses
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open.


Read more: http://engine-codes.com/p2004_ford.html#ixzz3lke1SreV

Sep 14, 2015 | Ford Cars & Trucks

2 Answers

P2004 code. where is the imrc valve located?


It is attached to the intake manifold, it is a valve that adjusts the runner length of the intake for optimal performance and fuel economy.

Jan 25, 2015 | 2006 Pontiac G6 GTP

1 Answer

Chhrysler sebring 2007 2.4 litter getting code p2004 intak manifold runner control how do you fix it


code p2004 refers to intake manifold air control actuator bank 1---actuator stuck open===causes --wiring--intake manifold air control actuator --mechanical fault.
also refers to intake manifold air control solenoid bank 1 solenoid stuck open===causes--wiring intake manifold air control solenoid --- mechanical fault
you may be able to remove and clean the units to ensure they move freely otherwise replace them

Dec 31, 2013 | Cars & Trucks

1 Answer

Honda accord 2007 2.2 fault code P2004


P2004 Intake Manifold Runner Control Stuck Open (Bank 1) check for a cracked or broken vacuum hose on the intake manifold, be careful, the little nubs they attach to are normally plastic so use care when removing, the dealer will say new manifold, But check for hose fittings or a cracked hose first

Jun 30, 2011 | 2004 Honda Accord

1 Answer

Check engine light came on and the code was P2004.Can you tell me where to find it on the motor?


P2004--Intake Manifold Runner Control Stuck Open (Bank1)

Remove the Air intake ducts --to throttle body ,you should find
the Runner Control Motor or Solenoid

Mar 28, 2011 | Dodge Caliber Cars & Trucks

1 Answer

Dont know problem, but i have fault code P2004


P2004 is intake manifold runner control stuck in the open position. The problem is common in several Ford models. Problem is either switch or actuators.The actuators can be tested using a tool to move them if they are styck and reading volts or in the control circuit.

Dec 01, 2010 | Ford Windstar Cars & Trucks

1 Answer

Service code p2004


Hi, code P2004 means Intake Manifold Runner Control is stuck open.
Solution Check Intake Manifold Flap Use Output Testing Perform Basic Setting (Switch ignition off between output test and basic setting)
Take care

Aug 04, 2010 | 2006 Volkswagen Passat

2 Answers

P2004


intake manifold runner stuck open. 2008 dodge avenger 2.4 how can i fix it....

Dec 13, 2009 | 2008 Dodge Avenger

Not finding what you are looking for?
2004 Honda Accord Logo

2,413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...