My factory installed radio on my F 150 also came with Serius radio. The aux button that I push to swap to Serius i not working. All other functions of the radio and truck are presently working. I don't know if it's a relay, fuse or a shot radio. I contacted Serius to make sure my account is still active and it is.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you have aux button there is a plug wire that mite be in the dash of the car, you could go to the radio manufacture website see if you can find the users manual, or installation guide, operational manual, the aux mite be a wifi option on other device of similar radio, that radio may have many versions and the version you got does not have that option with the cheaper version of radio that was installed when the car was made.
go to manufactures website, service, make, model,
it may need drivers to run the aux.
That interface most likely is not going to work, because it is not compatible with all the gm radios, don't work good with XM and rear video system,
the problem is the wiring and the software on the interface,
the PIE GM12-AUX v2 works with all the radios in gm vehicles,
radio needs to have a BAND button and CD/AUX
Even though your current radio has an AUX button the radio is not programmed to utilize it.
There is no 'easy' way to add the '07 Job 2 and later year model's factory Aux input. You will need to buy an aftermarket solution. Something like this http://pac-audio.com/productDetails.aspx?ProductId=821&CategoryID=24
After sitting all day in the parking lot at work, I started the truck to go home and everything seemed back to normal. There must be some sort of time related reset. I have not tried pushing the MODE button again and probably won't until I need to.
HELLO, ON THE IPOD BOX ARE SEVERAL NUMBER CODES. THEY HAVE TO BE SET TO THE RIGHT NUMBERS ON OR OFF BEFORE THE FACTORY RADIO WILL READ THE BOX. ONCE THE CORRECT NUMBERS ARE SET FOR YOUR VEHICLE THE AUX BUTTON WILL WORK JUST FINE. IF YOU DON'T HAVE THE BOOK WITH THE CODES IN IT. JUST COUNT THE WIRES ON THE ADAPTOR AND THE LOCATION OF THE PINS THEY CONNECT TO. THEN PUSH ONLY THOSE PINS UP IN THE ON POSTION. GOOD LUCK!