Question about 1999 Chevrolet Malibu

2 Answers

2000 Chevy malibu

How to get into the head light on the front drivers side to remove and replace the blub. I can't seem to locate where to get into the back side of it and the front doesn't appear to have access?

Posted by on

  • buildurwings Dec 19, 2008

    Thanks for your help, but we need you to be more detailed as to where the screws are located. We did remove a couple of screws on the top back side where it appear to bolt into the frame that wraps around to the inside hood rest. Please don't laugh but we might as well be 2 blonds trying to do this. I have changed the bulbs in my 2000 honda accord, but this malibu 2000 has us stumped.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are 2 clips you need to pop up with a flathead screwdriver. Mine are Blue. Once you pop those up, you can pull the bulbs out. You do not have to unscrew anything.

Posted on Jan 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

You have to remove the whole headlight assembly. There are only a few screws to remove and the assemblt comes off.

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 98 Chevy Malibu My car was hit on the driver side weeks later the headlight stopped working I replaced the whole headlight nd bulbs The auto low or high beams work but only in one head light


You may need to change the wiring harness.

2000 malibu headlight problem - Tech Support Forum

www.techsupportforum.com > ... > Automotive Support

Dec 14, 2008 - 8 posts - ‎2 authors
I have a 2000 chevy malibu with headlight problems. ... High beams work correctly.... I suspect a ground problem but cannot locate the ground cluster. ... Grouped together there, one pink wire to the Headlamp Switch, and one to ... my Wife's car has lowbeam on the left side that just won't work and now the ...

Dec 20, 2015 | Cars & Trucks

1 Answer

I have a 2000 chevy malibu and my tail lights are not working when my head light are on. They only work when I use the turn signals, breaks, or reverse. Can some one give me a solution. I have replaced the...


did you change the correct fuses! Locate the fuses in slot 22 and 23. they are in the underhood fuse box. drivers side left. Good-Day! you may also have a bad ground on tail lights.

Jun 10, 2014 | Cars & Trucks

1 Answer

I need to find out where the camshaft position sensors are located on a 2008 Chevy Malibu LS 4 cylinder. They need to be replaced and i was told that they are fairly easy to do it yourself.


The cam sensor is on the back of the engine, drivers side. On the side of the head, facing the wheel. Just under the rocker arm cover. Only thing on that side. Four bolts to remove it.

Jan 21, 2011 | 2008 Chevrolet Malibu

1 Answer

Location of starter on 2000 chevy malibu


It will be under the car in between the motor and the radiator on the drivers side right where the motor bolts up to the transmission. If you look down through the front exhaust manifold you should see it.

Oct 15, 2010 | 2000 Chevrolet Malibu

1 Answer

Chrysler T&C (2005) - Can anyone describe how to access, remove, and replace the bulb in the crescent-shaped reading lights at the front of the overhead console. The owner's manual says nothing, and...


Start at the front towards the winshield with a very small flat headed screwdriver. Getting under the lip of the light cover in the front pop the 2 front clip down in the front. Do Not do this on the seat side or you brake the clip that turn the light on/off. After poping the front down, side out towards winshield. The blub removes by turning counterclockwise. Blub is a 578

Feb 07, 2010 | 2005 Chrysler Town & Country

1 Answer

Rear brake light on a 2000 chevy malibu wont work. just the drivers side. passengers side works fine. replaced bulbs but wont work


check or put a ground wire on the light. maybe its bad. run from brake light to a suitable ground, to see if it works.

Sep 27, 2009 | 2000 Chevrolet Malibu

2 Answers

2000 Chevrolet Malibu LS airbag problems


The passenger side airbag is a lot easier then driver side. Take the glove box out and you will see two 10mm bolts holding it in place. When you open the passenger side front door, remove the panel on the side of the dash and you will see yellow connectors.The 1 closest to the front is attached to the air bag, it is clipped into the frame. Just pull it loose and take it out and your done. For the Driver side, it takes a skinny T27 to remove the two star bolts, then just disconnect the horn red clip and ground and install new airbag. The module is located under the passenger seat, underneath the carpet. Kinda stupid but thats where its at. You also need to replace the front impact sensor located behind the grille on the back side of the metal bar to each side. Follow the hood latch down. Also just to make sure, you know to disconnect the battery before you do all this. You don't want new airbags to accidentally deploy.

May 13, 2009 | 2000 Chevrolet Malibu

3 Answers

The front cigarett lighters do not work on my 2006 Chevy Malibu Maxx. What fuse do I need to change to fix this?


There is a fuse box located in the trunk on the drivers side. Remove the panel and the fuse is #20..also a 20 AMP fuse.

Mar 13, 2009 | 2006 Chevrolet Malibu Maxx

1 Answer

How can I change the headlight on a 2001 optima


You may have to take out the battery, there are 2 round gray colored covers that screw out located in front of your battery that correspond to the location of the head lights, one is for the high beam and the other is low beam. once the covers are off, unplug the wire that is attached to the blub, there is a retainer spring that holds the blub in, take each side and push down and out and the blub should come right out. be careful not to touch the new blub with your fingers, only touch the base.

Jan 04, 2009 | 2001 Kia Optima

Not finding what you are looking for?
1999 Chevrolet Malibu Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...