Question about 2002 Hyundai Accent

1 Answer

2002 hyundai accent needs brakes

Im need to get brake pads and roaders on my 2002 hyundai accent gl. im trying to figure out if a 2002 accent has rear brakes or only front ones?? And maybe about how much it would cost to get this done?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from uk to renew front disc(rotors) and brake pads on the accent are not beyond the mech minded diy er and can easilly be done if you follow instructions on the haynes manual etc and would save$$$$s in dealer charges ? if you diy as for the rear brakes they are drum brakes with shoes that are auto adjust but again can be done by diy with help of manual ? as for cost of parts ? you can obtain/price of all parts from good auto shop/superstore also a manual ? then by all means obtain a quote ? for local garage to do the brakes with cost of labour and parts ? then consider option of diy? i am sure you will be tempted/inspired if you browse the work involved hope this helps? contact again if you feel lucky? will be glad to assist if you get stuck? or req info ? merry xmas from uk

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What cause noise on my back wheel when I brake. The noise so bad.


this is a front wheel drive car. so the only things in the rear wheel area that typically make noise would be the rear brakes or the wheel bearings. Because you notice it more when braking i suspect the brakes are worn out. inspect the brake pad wear on both the inside and outside pads, if they look ok, you would need to investigate further for a possible wheel bearing or hub issue.

Feb 24, 2012 | 1996 Hyundai Accent

2 Answers

I have an 2006 Hyundai Accent Atlantic and I would like to know if front brakes have pads and rear brakes have shoes


2006 Accent Brakes, Suspension & Handling Specs • Four-wheel ABS • Four disc brakes including two ventilated discs • Electronic brake distribution • Spacesaver steel rim internal spare wheel • Strut front suspension independent with stabilizer bar and coil springs , torsion beam rear suspension semi-independent with stabilizer bar and coil springs

Read more: http://www.automotive.com/2006/12/hyundai/accent/specifications/handling-ride-braking.html#ixzz1JcYuzhff

Apr 15, 2011 | 2006 Hyundai Accent

1 Answer

Squeeks from rear brakes when cornering, when i press the brake pedal it stops


Your rear brakes need adjustment, you must remove the wheels, drums. Clean and lubricate the contact points and adjust the adjuster to specs.

Jul 17, 2010 | 2002 Hyundai Accent

2 Answers

Brakes squeeky oon rear,is this a drum brake


I don't think so....most cars now have all gone to disk . What you hear is everyday wear and dust build up from the pads..

Dec 21, 2009 | 2001 Hyundai Elantra

2 Answers

Change hyundai accent 2001 front brake pads


may have siezed caliper slide pins suggest buy reman loaded caliper assembly

Oct 05, 2009 | 2001 Hyundai Accent

2 Answers

I just replaced both front rotors and pads, along with the driver side caliper. My next step is to now bleed the brakes. my question is do i need to bleed all 4 brakes or just the 1 that was replaced?


you don't need to bleed front brakes if you only did rotors and pads. If you look at the master cylindar, there are 4 lines coming off of it, one for each brake. Only bleed what you replaced.

Sep 29, 2009 | 2002 Hyundai Accent

1 Answer

2003 Hyundai Accent Rear Brake Noise


the rear shoes need to be cleaned and adjusted. nothing to worry about unless it annoys you too much.

Mar 29, 2009 | 2003 Hyundai Accent

2 Answers

Loose brakes/ need tightened


Sounds like you got air into the line you will need to bleed your breaks. You will either need a brake bleeder tool. Or have someone else help you. Air in the line would cause this. Now if it is your rear brakes back up about 30 feet and slam on the brakes, easiest way to adjust so you do not have to get to the tensioner on the inside. But bleed the brakes first

Feb 10, 2009 | 2002 Hyundai Accent

1 Answer

Installing new brake pads on 2000 hyundai Accent GL


REMOVAL 8118049.gif 1. Remove the lower bolt and lift the caliper assembly up and secure it with a wire or some other retaining method. 2. Remove the pads. CAUTION: Do not depress the brake pedal while disassembling the pads 30c09b4.gif

INSPECTION 1. Check the pads for wear or oil contamination and replace, if necessary. caution_icon.gif The pads for the right and left wheels should be replaced at the same time. Never "drop" or intermix brake pad sets. All four pads must be replaced as a complete set. When replacing the brake pad, check for deformation. When replacing the guide spring, use a new one or the used one after cleaning away foreign material. 2. Check the pad for damage or deformation. Brake pad thickness: Standard value: 9 mm (0.354 in.) Service limited value: 2 mm (0.0787 in.)21873bf.gif
INSTALLATION 1. Install the pad clips. 2. Install the pads onto each pad clip.
3. Insert the piston in the cylinder using the Special Tool (09581-11000).b3dcdee.gif 4. Install the new pads. The shims are attached to each pad as illustrated5efc485.gif caution_icon.gif Be careful so that the disc or pad isn't contaminated by grease. 5. Install the bolt and tighten to the specified value. Tightening torque Guide rod bolt: 22~32 Nm(220~320 kgf·cm, 16~24 lb·ft)

Jun 11, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...