Question about 2000 Dodge Caravan

1 Answer

Trailer lites not working proper

Hook up with test light 4 prong but both lights flash when turn signal is turned on, and go out when brake is applyed[ 92 dodge grand carovan]

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 22,041 Answers

Bad earth connection,renew earth not passing enough amps evan if showing ok ...

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford Expedition left trailer brake/turn light not working.


if there is a power problem then the corresponding lights of the vehicle will out as well. If they work check where the harness is plugged in and check the connection.

Mar 02, 2015 | Ford Cars & Trucks

1 Answer

I have a standard 4 flat trailer plug on my truck but my trailer plug is also a 4 flat plug but has two brown wires going to one prong. how do i hook them together to make all my lights on trailer work


The 4-wire flat plugs usually have a white (ground), green (right brake/turn) yellow (left brake/turn) and brown (taillights - left and right). If your brake and turn lights work but the taillights don't, check the plugs (trailer and truck sides) for corrosion, and chek both the trailer and truck wiring harnesses for chafed insulation and bare conductors on the brown wires. Likewiae if the taillights work and the brake/turn lights don't, perform the same checks on those wires. And last but not least, be sure that the white wires (truck and trailer) are grounded well to the truck body and trailer frame.

Oct 14, 2013 | Cars & Trucks

1 Answer

Have issues with trailer lights. Both turn signals on trailer flash when I use left or right turn signal. Have 7 pin factory plug. Lights on trailer work fine, hooked up to 97 Silverado. Act funny on 2000...


Standard wiring colors are as follows:

4-Way

5-Way

6-Way

7-Way

Green

Yellow

Brown

White

Red

Blue

Purple

Right Turn & Brake

Left Turn & Brake

Tail Lights

Ground

Backup Lights

Electric Brakes

Auxiliary Power
Green- Right Turn and Brake
Yellow- Left Turn and Brake
Brown- Tail Lights
White- Ground
Red- Reverse (Back Up) Lights
Blue- Electric Brakes
Purple- Auxiliary Power

It sounds like your green and yello wires are shorted together somewhere along the length of the harness. I would check the wires on the trailer first. Easier yet, if you have another trailer to connec or access to another to use for testing, connect to it and see if the problem repeats; if it does the trouble is in the vehicle's wiring.

Jun 26, 2011 | 2001 GMC Jimmy

1 Answer

I would like to know the color code of the wires to the rear lights to hook up trailer wires. Tailights, break lights, left and right turn signals


brake lights, white/tan stripe
tail lights, black/yellow stripe
left turn, light green
right turn, tan
ground, black

Note that your car has separate filaments for brakes and turns, so you cannot use the standard 4-prong trailer connector and will need an extra filament in your trailer lights.
Please let me know if you have questions, and thanks for using FixYa.

Jun 11, 2011 | 2005 Chrysler Sebring Conv

1 Answer

I have a 2006 GMC Envoy and I am having a problem with my passenger turn signal on my boat trailer. The brake lights and parking light work fine. The lights are LED. I have tested the plung on the...


is trailer lite fixture grounded good try and wiggle fixture when u hit signal. next try wiggle pig tail on trailer , still no signal. it must be wire from truck, trace back to connection and check all splices. to see if signal light works on trailer unhook pigtail and get a battery charger or another battery, connect a jumper from positive side to signal spot on trailer hook up. hook up ground as well see if light works if not its in the truck for sure.

Apr 01, 2011 | GMC Envoy Cars & Trucks

1 Answer

When I hook up to a trailer, the left turn signal and the left brake light won't work. I have tried several trailers with the same results. I own a 2003 gmc 3/4 ton pickup. I have two places to connect the...


it sounds like either the wires controling the left brake light and turn signal are borken or loose on your truck. or there could be a problem with the ground for the trailer hookup. you should take a volt meter and then have someone put the brake on and test at the hook on the truck side to see if you are getting any voltage there and do the same thing with the turn signal. if you do not have any voltage there you need to trace the wires back up into the truck to find where you do have voltage . you may find a broken wire as you go. How many wires are there in your trailer hook up?

Sep 22, 2009 | 2000 GMC Sierra

2 Answers

Trailer hitch...no running lights (2004)


You'll have to follow the BROWN wire from the factory connector(with the running lights on of course) to the trailer connector and make sure you are getting power all the way to the two lamp fixtures. If so you've probably got two burned out 1157 bulbs or an inline fuse in the factory harness/ trailer harness.Good Luck, Dana

Aug 24, 2009 | 1991 Dodge Dakota

1 Answer

Looking for a wiring diagram for a 2006 Ford Expedition


7way- black is 12volt (power), brown, running lights, yellow is left turn signal and stop light, green is right turn signal and stop light, white is ground, blue is brakes, and orange is aux power (can be back up lights, if trailer equipped w/ them). 6way is the same, minus orange wire. I have run into some variations to the above color codes (brown, yellow and green only-sometimes these 3 are different than stated, but only mixed as that group, as to what they control- example would be green is running lights, brown and yellow are turn signal and stop lights, the others should be as stated), if you have any trouble with things not working properly, it may be due to these variations, although the above are pretty standard. If you have an ohm meter you can check as you go (check for power at black wire- should be constant 12v, turn on turn signal and check for power-it will fluctuate from approx. 12 volts to 0 volts as the signal power pulses in the wire) hit the brakes, blue wire should show power, etc. Let me know if you need more help as you go.

Apr 11, 2009 | 2006 Ford Expedition

1 Answer

2001 Sportage Trailer wire connections


brown to the tail lights. yellow to left turn signal. green to right turn signal. this is a basic 3 wire hook-up i use all the time w/4wire connectors for all trailers. white wire is not used. ground is established when you hook to the ball.
to find the correct wire to splice to, use a testor (has a clip to the bare wire, and a sharp point to the truck frame). using a needle, push it through a wire to rear light harness. turn on the turn signal. check if the connection is the blinker, testing until you have the blinker wire. the tail lights can be attached to the license plate wire. brakes and blinkers use same wire, so brake lights will work whenever the turn signal is attached.
to be sure everything is working right, have a second person go inside the truck and work the signals, brakes and lights one at a time while you are at the back of the trailer telling what to do.

Oct 24, 2008 | 2001 Kia Sportage

2 Answers

2003 denali trailer wiring


If your signals & brakes are on 2 different circuits, ( for example a red lens for stop & an Amber for turn.) then you'll need to buy a converter that goes between vehicle & trailer. They're not too expensive at any trailer or RV place. I think some of the autoparts stores stock them now too.

Jun 20, 2008 | 2004 GMC Sierra Denali

Not finding what you are looking for?
2000 Dodge Caravan Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...