Question about 2001 Chevrolet S-10

1 Answer

2001 s10 cluster lights not working, fuse good

Shift position lights up but rest of cluster doesn't

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 47 Answers

I know it might sound stupid, but is the dimmer control turned up? If that is not the problem then it is a good posibility that it is the cluster itself. Unfortunatly in a GM vehicle that new you can not just go the the local salvage yard and get another one. It has to be ordered through a dealer and programed for your vehicle. Last I knew they ran about $350. Hope yours is the simple fix.

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual says that if the airbag light is on, it can cause all of the gauges on the IP to quit working. It says to check Fuse #22.. Fuse is ok. Any suggestions?


cab fuse or engine bay fuse? JB or PDC box?
no not true.
so why not post what the car does good and bad.
car runs perfectly and shifts ? all that.
all other light in car work? radio, etc.
with parking lights on does cluster glow? (back ground illumination?)
the cluster warning lights are dead , all are dead?
are all gauges, dead too? if some are say what? are dead.?
fuel , and engine heat?


the fsm is free.with full docs and schematics, lets look together now.
WJ jeep 95
click wiring (at end)
chapter 8w-40-1
volt meter in hand.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

see that page?
page 2 to 9 is cluster "instruments "
PDC fuse 17 (engine bay) is PDC
and cab JB fuse 10

so 22 is bogus. there is no fuse 22 (usa car)
there is fuse 22 terminal. on fuse 9 and fuse 21>?
forget terminals, we do fuses real names,

first off, the cluster is a computer, im not privy to its programming,
(is anyone?)
but it must communicate to the PCM or its will fail, on the canbus
so turn on ignition (car battery charged to 12.6vdc rested)
all warning lights come one.
if not the cluster is not happy, this is a selft tests. of lamps.
the fuse posted above are the only fuses for it. PDC 17 and JB10
we use a scan tool next to be sure the PDC is not barfing comm errors. first. (or DTCs stating power loss)

recap
read the manual above
see the correct fuses for cluster
see that it is a computer with comm lines.
if those 2 pins on the cluster are12vdc key on then that is not the problem and the ground pin on cluster is at 0v, not 12v.

fuse 5 and 9 run (JB) run air bag computer box.

this is power to the cluster below, 8w-40--2
the whole cluster runs off those 4 power pins, if power is lost
the cluster brain goes dead. the left pin below is memory pin.
right top is main power. to cluster.


25449976-rfzsrgdtqaicmpcrwkc1npqq-2-0.jpg if this is good
a scan tool is necessary to move on.
just like all cars with CanBUS, ,
an innova 3140 works. good.

Feb 19, 2015 | 1995 Jeep Grand Cherokee

2 Answers

Instrument control panel gear position light is out


check your fuse on the instrument cluster and light. And it is probably your stop brake switch needs to be replaced. Just had to do the stop brake switch on 95 chevy suburban. the brake light and tail lights weren't working, had to get the switch now works. good luck I hope this helps you.

Mar 23, 2013 | 2001 Mercury Sable

1 Answer

2001 chevy silverado dash needles work then dont tach dont work pdnr123 dont light up


check the ground on you safty nutral switch its on the transmission drivers side ooks upwhere the shifting cable

Sep 30, 2012 | Chevrolet Silverado Cars & Trucks

3 Answers

1997 Honda accord nothing on instrument cluster works,only the battery light. Power windows will not work. shift lock solenoid doesn't work.Digital clock does not work. Lights on the console shifter...


1997 Honda accord nothing on instrument cluster works,only the battery light. Power windows will not work. shift lock solenoid doesn't work.Digital clock does not work. Lights on the console shifter don't light up. Help!

Aug 29, 2011 | 1997 Honda Accord

2 Answers

Dash lights for speedometer and tach don't work. All fuses are good. 95 Jetta


You have a bad electrical cluster. Replace the cluster and your dash lights speedometer and tach should work just fine.

Jan 25, 2010 | 1995 Volkswagen Jetta

3 Answers

Instrument cluster does not work except oil pressure and voltage


I actually had the exact same thing happen to my 2001 Silverado and I bought an instrument cluster too. It was the 10A radio fuse in the fuse panel beside the dash. It was not pushed in all the way.

Aug 06, 2009 | 2001 Chevrolet S-10

3 Answers

No odometer light or gear selector. tried changeing cluster didn't work. didn't know if it was a common problem. maybe an easy solution before i start diggin into it.


Thanks Johnyboyy & Sam35edm! I checked my fuse (10amp) and it looked ok. I replaced it and the lights for the odometer and gear shift indicator both lighted up. I then inspected the old fuse and it looked a little tarnished on the contacts. I then cleaned the contacts on both sides of the original fuse with a razor blade to remove the tarnish. The light lit brighter than ever! Looks like the fuse wasn't making good contact in its socket because of the tarnish.

Mar 22, 2009 | 2001 Buick Century

Not finding what you are looking for?
2001 Chevrolet S-10 Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...