Question about 1996 Chevrolet Caprice Classic

1 Answer

What tool to use for removing 96 caprice side mirror

I have taken the dooe panel off and there are three bolts holding the mirror in place. What tool do I use and what size?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

Sheesh... you tell us...your looking at it.... my guess is a T30 torx

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace rear view mirror


Instructions
1


Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.

2


Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.





3


Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.

4


Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).

5


Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.

6


Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Apr 18, 2012 | 2005 Ford Focus ZX3

1 Answer

Loose wing mirrow


Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror...
1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.
2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.
3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.
4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).
5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.
6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Hope helps (remember comment and rated this). TY for using Fixya.

Jun 26, 2010 | 2000 Ford Focus

1 Answer

Jeep Cherokee side mirror install


You have to remove the door panel to access the mounting bolts. Once you remove the screws that secure the handle and other components from the door panel, the panel will pop off when you pull it outward. The top of the panel will come off when you push up after lossening the bottom and side clips. There a flat tool that is used to release these clips, but they do break when you try to remove them, but are easily purchased at any auto center.
There are three bolts to remove the mirror. If you have the rare heated rear view mirror option, you'll have to disconnect the harness before removing the mirror.

May 22, 2010 | 2000 Jeep Cherokee

1 Answer

How do you get the passenger side door panel off so I can replace the mirror?


remove all bolts on panel if you have a newer vehicle than after all fastners both hidden behind plastic snaps and ones that are exposed and the all other side mirror panels are removed it should lift up and then off. older vehicles have plastic pins that snap into little holes 360 around the panel. the newer vehicles have like plastic brakets that rest in rectangular holes to hold the panel in place/... so when all the fastners on the door are taken out then just lift straight up on the panel.

Aug 09, 2009 | 2006 Ford F-150

2 Answers

How to remove/replace driver's side mirror on 96 blazer


remove door panel.. there should be access hole to get to the bolts.

Jul 31, 2009 | 1996 Chevrolet Blazer

2 Answers

Need to replace Mirror Assembly, 03 suburban


Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.

Jun 22, 2009 | 2001 Chevrolet Suburban

2 Answers

Side View Mirror Installation instructions needed


For a 2005 Honda Pilot, I am a complete Amateur and I had no problem installing this mirror.

1) Lower the window, and only remove the Interior MIRROR panel, NOT the entire DOOR Panel, as some sites my recommend.
2) Once the Interior Panel is removed, the power cable is attached to the mirror, remove this cable.
3) There are 3 Bolts that are BLACK (atleast in my vehicle) that need to be removed.
3) Once the bolts are removed, the mirror should come off easily.
4) Place the new mirror in place of the old one and secure all three bolts, and then secure the power cable.
5) Then place the interior panel back.

That is it!

May 20, 2009 | 2005 Honda Pilot

1 Answer

What tool do I use to remove the bolts from a passenger mirror on a 1996 chevrolet caprice?


normally it is a 10-12 millimeter socket or wrench sometimes both if it is a power mirror you may have to remove the door panel

Dec 18, 2008 | 1996 Chevrolet Caprice Classic

2 Answers

Passenger side mirror


If you need to replace the entire mirror - it's a little involved. First you need to take the upper extension panel off from behind the mirror (black triangle) - just pull it of starting at the top. It will snap back on later. Next - remove the different screws holding the door panel in place (not the ones behind the mirror yet!) One is under the handle (pull it out and pull out the filler panel - small plastic thing that has a hole to pry it out). Then take off the rear red light - also pops off - and remove that screw. Finally - pick up the rubber filler where your fingers pull the door shut and remove these torx bolts.

Now is the tricky part. Snapp off the entire interior panel. It will pop off - but very difficult. It will sound like it is breaking! Start at the outer bottom corner - and use a door panel remover tool - check Amazon or E-bay - to keep from breaking things. Pull it out from all around the bottom and sides and then lift it up over the door lock. It good to have a friend help here. The panel will still be held on by a cable - that is your door release - leave it alone and let the panel hang by it (or better, put a box under it to rest on).

Now...remove the three bolts holding the mirror on - have a friend help hold the mirror while you do this or it will scratch your new car! Since the inner panel is off - you can also disonnect the mirror plus and remove it. It sounds silly - but the only reason to remove the door panel is to unplug it!

Get you new mirror and reverse the steps.

If you are just replacing the glass (non-heated) - get a replacement from the dealer. Adjust the mirror all the way to the inside and reach behind and pop it off. CAREFUL - put tape over the entire glass as it will likely break even more! Remove your connectors if heated - and replace (and reconnect) with your new glass. It just pops back on!

Replacing glass is easy - just be careful of cheap imitations on e-abay). And never use cheap flat glass on the passenger side! The DOT has special requirements for mirror glass - buy it from gmpartsdirect.com or your local dealer.

kb

Oct 30, 2008 | 2008 Chevrolet Impala

1 Answer

Replace side view mirror on Dodge Caravan


You will need to remove the triangular panel on the inside of the door on the opposite side of the broken mirror. Once you remove the panel, you will see the retaining bolts holding the mirror in place. Once you remove the bolts, the mirror can then be pulled out from the outside. Reverse the procedure to reinstall the new mirror.

Aug 09, 2008 | 1992 Dodge Caravan

Not finding what you are looking for?
1996 Chevrolet Caprice Classic Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...