Question about 1995 Honda Accord

1 Answer

Wiring harness I was wanting to know if the engine wiring harness(Main Harness) from a 1994 Honda accord will work in a 1995 honda accord and match up.Are the connectors the same

Posted by on

  • chrisw0915 Dec 23, 2008

    Thank you for answering me I bought the same wiring harness that came out of a car just like mine and I'm hoping it will match up Thanks Agin

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 44 Answers

I dont think so. 95 had 2 different engines. it will be close. you will have to check every connection and it will take some time. id get the correct one for your model and year and it still might be a little different.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed a Boss Bv9976b in my 1995 Honda accord,have no sound out speakers?


if you are sure the speakers are good and the wiring to the speaker is correct then you need to look at the Boss.. a volt meter on the output either at the speakers or the harness should tell you, as it fluctuates with the volume of the unit, hopefully you do have power to the Boss...

Dec 30, 2014 | Honda Cars & Trucks

1 Answer

I have a 1995 honda accord v6 and my rpm gauge is crazy and my car seems like it wants to stall out when i'm driving.


I have a chevy truck and my throttle position sensor had a short in the wiring harness one of the wires was touching the valve gasket cover and rubbed so much it cut the wire in half so i got a wire but splice and connected the wire back together after i had already bought a new sensor hope this helps also check my post i wrote a little tip about my problem my engine was idling at like 3500 rpm and i had an engine code p0121 &p0123 is your engine light on

Mar 03, 2011 | 1995 Honda Accord

1 Answer

If I put a 1995 honda accord engine in my 1992 honda accord will it fit and hook up up to my wireing harness?


I would put your intake manifold and engine harness on the '95 motor. You may also need your Air Conditioner and mounting bracket. Keep your old motor right beside you and switch anything that is different. Notice the O2 sensor(s), etc.

May 21, 2010 | 1992 Honda Accord

1 Answer

1999 Honda Accord LX sedan trailer harness install help


The Running Lights are BROWN, the RIGHT Turn is GREEN, the LEFT Turn is YELLOW and White is GROUND.

Nov 11, 2009 | 1999 Honda Accord

1 Answer

I need to know what each color means on my distributor???


Review this guide as reference; this Electrical Schematic Diagram applies for 1994 Accord Coupe series of model. Here you will find complete explanation about electrical system of the vehicle. Started from Troubleshooting (tips and precautions) on handling the electrical system, in this manual you will be guided step by step examining each electrical component installed and its connection for example in Wire Harness and Ground Location, started from Engine Compartment, wiring harness is shown from engine ground cable, starter cable, and battery ground cable.

These 359 pages of pdf.fieltype manual is divided into some sections which are Wire Color Code, Relay and Control Unit Location, Wire Harness and Ground Location, Air Conditioning System Circuit, Anti-lock Brake System, Battery, Blower Control, Charging System, Cruise Control, Fan Control, Fuel Pump, Fuses, Ground Distribution, Heater Control, Ignition System Control, Lighting System, and etc.
Download the complete 1994 Accord Coupe Electrical Schematic Diagram here.

You can also find complete workshop manual of 1994 Accord Coupe here.

Pass: freepdfmanual.com

Good luck.

Sep 21, 2009 | 1997 Honda Accord

1 Answer

Im puttin a new head unit with a different wire harness, i know what all the wires are on that wire harness, but with the 92 accord stereo wire harness i need to know which wires are speaker, remote, power...


You can buy a cheap harness from the local parts store for your Honda made specifically to put in aftermarket head units. Since you know the pin outs on your head unit, you can wire it up quickly uning this harness and it will plug directly into the factory Honda harness. Go to Scosche dot com part lookup for your number - I think the wiring schematic is on the outside of the package, too.

Apr 14, 2009 | 1992 Honda Accord

1 Answer

Cut off


I suggest you to check your brake boster if there is air leak, to do this, start the engine, press the brake and hold. Observe the engine idle while you are holding down, if the engine become running roughly or engine cut off, it means you have to replace brake boster. but if this procedure doesn't make sense, try to knock the fuse housingseveral times while the engine is running if the engine.if cut off while knocking, most probable there is loos fuse or relay. secure all the fuse and try to knock again, if the problem still excesting, try to wigle in deferent direction the wire loom around the engine bay especially the wire harness of crank shaft and cam shaft sensors while the engine is running. if stil can't find the problem check the ignition switch harness try to wigle as while. if the problem occure while wigling the wire harness definitely you have loose connection.

Mar 09, 2009 | 1994 Honda Accord

Not finding what you are looking for?
1995 Honda Accord Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...